一种压阻式压力传感器稳健设计方法研究

李佳玮; 谭晓兰; 汪海涛

doi:10.13433/j.cnki.1003-8728.2015.0822

一种压阻式压力传感器稳健设计方法研究

doi: 10.13433/j.cnki.1003-8728.2015.0822

1.
北方工业大学机电工程学院, 北京 100144

基金项目:

国家自然科学基金项目（51375017）与北京市自然科学基金项目（3122014）资助

详细信息

作者简介:
李佳玮（1988-），硕士研究生，研究方向微传感器稳健设计， lijiawei8799@163.com

通讯作者:
谭晓兰，副教授，博士，硕士生导师，tanxiao2004@126.com

计量
- 文章访问数: 106
- HTML全文浏览量: 17
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2013-11-11
- 刊出日期: 2015-08-05

Research on Robust Design Method of a Piezoresistive Pressure Sensor

1.
College of Electromechnical Engineering, North China University of Technology, Beijing 100144, China

摘要

摘要: 利用ANSYS软件对膜片应力进行仿真分析，对得到的应力数据沿电阻条所在路径积分，计算出力敏电阻在外界压力下阻值的变化；将Taguchi方法应用到传感器的设计中，通过对力敏电阻尺寸及其位置参数进行分析，确定影响因素和水平，利用正交实验和信噪比分析参数的稳健性，最终选出性能最优的设计参数组合。此方法能够提高传感器的性能与质量。
- 压阻式压力传感器 /
- 灵敏度 /
- 仿真分析 /
- 路径积分 /
- Taguchi方法 /
- 信噪比
Abstract: ANSYS software is used to simulate and analyze the stress of the membrane, then integration along the path of resistance to calculate the changes of resistance with the result stress date. Taguchi robust design method will be applied in the design of the sensor, and the effect factors and levels were determined with analyzing the parameters of varisitor size and location. The orthogonal experiment design and signal to noise ratio were calculated to carry out the robustness of parameters. Finally, the optimal combination of parameters is selected. This method can improve the performance and quality of the piezoresistive pressure sensor.
- computer simulation /
- design of experiments /
- MEMS /
- optimization /
- path integration /
- piezoelectricity

HTML全文

参考文献(15)

[1]	李伟东,吴学忠,李圣怡. 一种压阻式微压力传感器[J].仪表技术与传感器,2006,(7):1-5 Li W D, Wu X Z, Li S Y. Micro piezoresistive pressure sensor[J]. Instrument Technique and Sensor, 2006,(7):1-5 (in Chinese)
[2]	易选强,苑伟政,马炳和,等.压阻式微型压力传感器敏感结构设计[J].西北工业大学学报,2008,26(6):782-786 Yi X Q, Yuan W Z, Ma B H, et al. Designing the sensing structure of a certain micro pizoresistive pressure sensor[J]. Journal of Northwestern Polytechnical University, 2008,26(6):782-786 (in Chinese)
[3]	杨涛,何叶,李磊民.微通道热沉的稳健优化设计[J].系统仿真学报,2006,18(9):2630-2637 Yang T, He Y, Li L M. Robust optimization design for microchannel heat sinks[J]. Journal of System Simulation, 2006,18(9):2630-2637 (in Chinese)
[4]	王大军,李淮江.一种基于MEMS技术的压力传感器芯片设计[J].吉林师范大学学报,2011,(1):133-136 Wang D J, Li H J. Design of a pressure sensor chip based on MEMS technology[J]. Journal of Jilin Normal University, 2011,(1):133-136 (in Chinese)
[5]	种传波.基于MEMS技术的压力传感器研究[D].北京:北京工业大学,2008 Zhong J B. Study on pressure sensor based on MEMS technology[D]. Beijing:Beijing University of Technology, 2008 (in Chinese)
[6]	Krondorfer R, Kim Y K, Kim J, et al. Finite element simulation of package stress in transfer molded MEMS pressure sensors[J]. Microelectronics Reliability, 2004,44(12):1995-2002
[7]	韩锐锐,张兆华,任令天,等.压阻式压力传感器灵敏度与线性度的仿真方法[J].微纳电子技术,2012,49(2):96-101 Han R R, Zhang Z H, Ren T L, et al. Simulation Method for the sensitivity and linearity of piezoresitive pressuresensors[J]. MEMS and Sensor, 2012,49(2):96-101 (in Chinese)
[8]	种进波,李德胜,刘本东,等.高灵敏度微压力传感器的优化设计[J].微细加工技术,2007,8(4):50-53 Zhong J B, Li D S, Liu B D, et al. Optimum design of a micro-pressure sensor with low scale and high sensitivity[J]. Micro Fabrication Technology, 2007,8(4):50-53 (in Chinese)
[9]	张艳红,刘兵武,刘理天,等.TPMS硅基压阻式压力传感器的研制[J].传感器技术学报,2006,19(5):1822-1825 Zhang Y H, Liu B W, Liu L T, et al. Design and fabrication of a novel silicon piezoresistive pressure microsensor for TPMS[J]. Chinese Journal of Sensors and Actuators, 2006,19(5):1822-1825 (in Chinese)
[10]	陈立周.稳健设计[M].北京:机械工业出版社,2000 Chen L Z. Robus design[M]. Beijing: China Machine Press, 2000 (in Chinese)
[11]	何叶.微通道冷却器稳健设计研究[D].绵阳:西南科技大学,2005:38-43 He Y, Microchannel cooler robust design[D]. Mianyang:Southwest University of Science and Technology, 2005:38-43 (in Chinese)
[12]	莘海维,张志明,戴永斌,等.压阻式金刚石压力传感器的优化设计[J].传感器技术,2002,21(3):21-24 Xin H W, Zhang Z M, Dai Y B, et al. Optimum design of piezoresistive diamond pressure sensor[J]. Journal of Transducer Technology, 2002,21(3):21-24 (in Chinese)
[13]	杨涛,何叶,魏东梅,等.微机电器件的稳健设计[J].工程设计学报,2004,11(3):124-127 Yang T, He Y, Wei D M, et al. Robust design for MEMS devices[J]. Journal of Engineering Design, 2004,11(3):124-127 (in Chinese)
[14]	Hsieh H S, Chang H C, Hu C F, et al. Method for sensitivity improvement and optimal design of a piezoresistive pressure sensor[C]//2010 IEEE Sensors, Kona HI USA:IEEE, 2010
[15]	杨俊松.机械式微压力传感器的稳健设计研究[D].北京:北方工业大学,2005:30-37 Yang J S. The research of the optimal design of sensor[D]. Beijing: North China University of Techology, 2005:30-37 (in Chinese)