一种复杂曲面打磨机器人自适应贴合柔性机构研究

汪源; 朱伟; 沈惠平

doi:10.13433/j.cnki.1003-8728.2015.0806

一种复杂曲面打磨机器人自适应贴合柔性机构研究

doi: 10.13433/j.cnki.1003-8728.2015.0806

1.
常州大学机械工程学院, 常州 213016

基金项目:

国家自然科学基金项目（51075045）、常州市科技支撑计划（工业）项目（CE20110080）及常州市应用基础研究计划项目（CJ20120008）资助

详细信息

作者简介:
汪源（1989-），硕士研究生，研究方向为工业机器人，并联机构，wang123yuan@126.com

通讯作者:
朱伟，副教授，博士，zhuwei@cczu.edu.cn

计量
- 文章访问数: 290
- HTML全文浏览量: 25
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2013-10-23
- 刊出日期: 2015-08-05

Exploring Adaptive Polishing Mechanism of a Complex Curved Surface Polishing Robot

1.
School of Mechanical Engineering, Changzhou University, Changzhou 213016, China

摘要

摘要: 针对工程中复杂曲面打磨困难的问题，提出一种能迅速贴合工件表面的柔顺混联式自适应机构，对其工作空间、运动学和动力学工作特性进行了分析研究。利用基于方位特征集的拓扑结构理论求解自适应机构的自由度、耦合度。利用数学应用软件对机构的参数进行数值计算，获得了自适应机构在抛光打磨过程中的工作特性曲线和工作空间模拟图。建立自适应机构的样机模型并进行样机实验，分析了在对模拟的复杂工件曲表面加工时的运动学和动力学特性，实验得出本设计相对传统机型的优势。
- 曲面 /
- 打磨 /
- 机器人 /
- 自适应机构
Abstract: In order to overcome the difficulty in grinding a complex curved surface, we put forward a flexible and parallel serial adaptive polishing mechanism which can adapt to the surface of a workpiece quickly. Its work space, kinematic and dynamic characteristics have been analyzed. We analyzed its degrees of freedom and degrees of coupling with the theory of topological structure based on the position and orientation characteristic equations. The performance curve and simulated diagram of work space was obtained with MATLAB. The virtual prototype model of adaptive polishing mechanism was built; the kinematic and dynamic characteristics of the adaptive polishing mechanism of the complex curved surface were analyzed. Advantages over the traditional polishing mechanism were also obtained through experiments.
- adaptive polishing mechanism /
- complex curved surface /
- computer simulation /
- degrees of freedom (mechanics)

HTML全文

参考文献(10)

[1]	汪鎏,马国红,张华.工业机器人空间曲线实时轨迹规划算法[J].微计算机技术,2010,26(5):169-170,179 Wang L, Ma G H, Zhang H. Industrial robot space curve real-time path planning algorithm[J]. Microcomputer Information, 2010,26(5):169-170,179 (in Chinese)
[2]	马履中,陈修祥,杨启志,等.基于并联机构的具有冗余自由度四自由度弹性阻尼减振装置研究[J].中国机械工程,2006,17(17):1761-1764 Ma L Z, Chen X X, Yang Q Z, et al. Research on 4-DOF parallel mechanism-based vibration damping device with redundant freedom[J]. China Mechanical Engineering, 2006,17(17):1761-1764 (in Chinese)
[3]	Nahavandi S,Uddin M J,Nasu Y, et al. Automated robotic grinding by low-powered manipulator[J]. Robotics and Computer-Integrated Manufacturing, 2007,23(5):589-598
[4]	Furukawa T, Rye D C, Dissanayake M W M G, et al. Automated polishing of an unknown three-dimensional surface[J]. Robotics & Computer-Integrated Manufacturing, 1996,12(3):261-270
[5]	冯忠磊,余跃庆,王雯静.模拟柔顺机构中柔顺杆件末端特征的2R伪刚体模型[J].机械工程学报,2011,47(1):36-42 Feng Z L, Yu Y Q, Wang W J. 2R Pseudo-rigid-body model of compliant mechanisms with compliant links to simulate tip characteristic[J]. Journal of Mechanical Engineering, 2011,47(1):36-42 (in Chinese)
[6]	杨廷力,刘安心,罗玉峰,等.机器人机构拓扑结构设计[M].北京:科学出版社,2012 Yang T L, Liu A X, Luo Y F, et al. Theory and application of robot mechanism topology[M]. Beijing: Science Press, 2012 (in Chinese)
[7]	辛礼兵.基于伪刚体模型的柔性铰链机构自由度分析[J].机械传动,2011,35(8):78-80 Xin L B. Degree of freedom analysis of flexible hinge mechanism of pseudo-rigid-body model[J]. Journal of Mechanical Transmission, 2011,35(8):78-80 (in Chinese)
[8]	Otmar S. Mechanical processing automated grinding and polishing of car trimmings [J]. MO Metalloberflache Beschichten von Metall und Kunststoff, 1999,12:17-18
[9]	张铁,谢存禧.机器人学[M].广州:华南理工大学出版社,2001 Zhang T, Xie C X. Robotology[M]. Guangzhou: South China Science and Technology University Press, 2001 (in Chinese)
[10]	李仕华,于长城,田圆.一种新型四自由度非对称并联机构的运动学分析[J].燕山大学学报,2011,35(5):385-390 Li S H, Yu C C, Tian Y. Kinematics analysis of a novel asymmetric four-DOF parallel mechanism[J]. Journal of Yanshan University, 2011,35(5):385-390 (in Chinese)