留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

锥齿轮推杆式弹头偏转机构的设计与仿真

胡寒栋 谷良贤 梁毅辰 孙晓峰

胡寒栋, 谷良贤, 梁毅辰, 孙晓峰. 锥齿轮推杆式弹头偏转机构的设计与仿真[J]. 机械科学与技术, 2015, 34(7): 1127-1130. doi: 10.13433/j.cnki.1003-8728.2015.0732
引用本文: 胡寒栋, 谷良贤, 梁毅辰, 孙晓峰. 锥齿轮推杆式弹头偏转机构的设计与仿真[J]. 机械科学与技术, 2015, 34(7): 1127-1130. doi: 10.13433/j.cnki.1003-8728.2015.0732
Hu Handong, Gu Liangxian, Liang Yichen, Sun Xiaofeng. Design and Simulation of Hand-spike Nose Deflecting Mechanism for Guide-screw[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(7): 1127-1130. doi: 10.13433/j.cnki.1003-8728.2015.0732
Citation: Hu Handong, Gu Liangxian, Liang Yichen, Sun Xiaofeng. Design and Simulation of Hand-spike Nose Deflecting Mechanism for Guide-screw[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(7): 1127-1130. doi: 10.13433/j.cnki.1003-8728.2015.0732

锥齿轮推杆式弹头偏转机构的设计与仿真

doi: 10.13433/j.cnki.1003-8728.2015.0732
详细信息
    作者简介:

    胡寒栋(1993-),硕士研究生,研究方向为飞行器总体设计、气动和结构,986183389@qq.com

    通讯作者:

    谷良贤,教授,博士,gulx@nwpu.edu.cn

Design and Simulation of Hand-spike Nose Deflecting Mechanism for Guide-screw

  • 摘要: 分析现有偏转驱动机构缺点,总结了弹头偏转机构的设计要求,并针对该要求设计出一种锥齿轮推杆式偏转机构;接着推导了锥齿轮推杆式偏转机构弹头偏角和电动机转动参数的关系。建立虚拟样机并结合ADAMS与MATLAB/Simulink开展联合仿真,证明锥齿轮推杆式驱动机构具有精度高、响应速度快、可实现较大角度偏转等优点,能够满足偏转弹头控制的要求。
  • [1] Landers M G, Dynetics L H, Auman L M, et al. Deflectable nose and canard control for fin stabilized projectile at supersonic and hypersonic speeds[R]. Washington:AIAA,3805-2003
    [2] Milton E, Jr M E, Auman L M. A productivity oriented application of computational fluid dynamics to the design of a hypervelocity missile[R]. Washington:AIAA,2937-2002
    [3] Barrett R M, Stutts J, Modeling, design and testing of a barrel-launched adaptive munition[C]// Proceedings of SPIE, 1998
    [4] 高原,谷良贤,龚春林.一种偏转弹头控制系统方案的特性研究[J].弹箭与制导学报,2006,26(1):890-892 Gao Y, Gu L X, Gong C L. Investigation in a deflectable nose control scheme[J]. Journal of projectiles, Rockets, Missiles and Guidance, 2006,26(1):890-892 (in Chinese)
    [5] Stutts J C, Barrett R M. Development and experimental validation of a barrel-launched adaptive munition[R]. AIAA-98-2037
    [6] 王明,谷良贤,高原.斜盘式偏转机构方案仿真研究[J].计算机仿真,2008,25(10):23-26 Wang M, Gu L X, Gao Y. Simulation a nose deflecting mechanism consisting of two rolling sloping plats[J]. Computer Simulation, 2008,25(10):23-26 (in Chinese)
    [7] 李建英.弹头偏转机构的设计与仿真分析[D].西安:西北工业大学,2012 Li J Y. Designs and simulations of the nose defecting device[D]. Xi'an: Northwestern Polytechnical University, 2012 (in Chinese)
    [8] Sun X F, Gu L X. Dynamics of a deflectable nose missile[J]. Science China(Technological Sciences), 2012,12:3483-3494
    [9] 黄文虎,邵成勋.多柔体系统动力学[M].北京:科学出版社,1996 Huang W H, Shao C X. Dynamics of flexible multi-body systems [M]. Beijing:Science Press, 1996 (in Chinese)
    [10] 张越今,宋健.多体动力学仿真软件ADAMS理论及应用研讨[J].机械科学与技术,1997,16(5):753-758 Zhang Y J, Song J. Studyonthe characteristicof complex modesof cyclic periodic visco-elastic structure[J]. Mechanical Science And Technology, 1997,16(5):753-758 (in Chinese)
    [11] 刘小平,郑建荣,朱治国,等.虚拟样机及相关技术研究和实践[J].机械科学与技术,2003,22(S):235-238 Liu X P, Zheng J R, Zhu Z G, et al. Study and experiment on virtual prototype and its relating technology[J]. Mechanical Science and Technology, 2003,22(S):235-238 (in Chinese)
    [12] Berry R P, Lawless D F, Cayson S C, et al. Magnetostrictive missile guidance system[P]. United States Patent: 6467722, 2002
    [13] 赵瑞萍.直流无刷电动机控制系统的设计与仿真[D].哈尔滨:哈尔滨工程大学,2006 Zhao R P. Control system design and simulations of the brushless DC motor [D]. Harbin: Harbin Engineering University, 2006 (in Chinese)
    [14] Lyshevski S E. High-torque density integrated electrome chanical fight actuators[J]. IEEE Trans on Aerospace and Electmnic System, 2002,38(1):174-182
    [15] 谢志诚,李益华,林利红.无刷直流电机双闭环控制系统的建模与仿真[J].电机技术,2010,(2):26-30 Xie Z C, Li Y H, Lin L H. Modeling and simulation of double-loop control system of the brushless DC motor[J]. Electrical Machinery Technology, 2010,(2):26-30 (in Chinese)
    [16] 陶可妍,闫英敏.基于MATLAB无刷直流电机伺服系统的仿真[J].微计算机信息,2007,23:214-216 Tao K Y, Yan Y M. A novel method for simulation of brush-less dc motor servo-control system based on MATLAB[J]. Microcomputer Information, 2007,23:214-216 (in Chinese)
    [17] 王涛,张会明.基于ADAMS和MATLAB的联合控制系统的仿真[J].机械工程与自动化,2005,130:79-81 Wang T, Zhang H M. Study on associated control system simulation based on ADAMS and MATLAB software[J]. Mechanical Engineering & Automation, 2005,130:79-81 (in Chinese)
  • 加载中
计量
  • 文章访问数:  235
  • HTML全文浏览量:  53
  • PDF下载量:  11
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-10-30
  • 刊出日期:  2015-07-05

目录

    /

    返回文章
    返回