留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于ABAQUS齿轮接触分析的前后处理

侯祥颖 方宗德 蔡香伟 宁程丰

侯祥颖, 方宗德, 蔡香伟, 宁程丰. 基于ABAQUS齿轮接触分析的前后处理[J]. 机械科学与技术, 2015, 34(7): 993-996. doi: 10.13433/j.cnki.1003-8728.2015.0703
引用本文: 侯祥颖, 方宗德, 蔡香伟, 宁程丰. 基于ABAQUS齿轮接触分析的前后处理[J]. 机械科学与技术, 2015, 34(7): 993-996. doi: 10.13433/j.cnki.1003-8728.2015.0703
Hou Xiangying, Fang Zongde, Cai Xiangwei, Ning Chengfeng. Pretreatment and Post Treatment of Tooth Contact Analysis Based on ABAQUS[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(7): 993-996. doi: 10.13433/j.cnki.1003-8728.2015.0703
Citation: Hou Xiangying, Fang Zongde, Cai Xiangwei, Ning Chengfeng. Pretreatment and Post Treatment of Tooth Contact Analysis Based on ABAQUS[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(7): 993-996. doi: 10.13433/j.cnki.1003-8728.2015.0703

基于ABAQUS齿轮接触分析的前后处理

doi: 10.13433/j.cnki.1003-8728.2015.0703
基金项目: 

国家自然科学基金项目(51175423,51375384)资助

详细信息
    作者简介:

    侯祥颖(1990-),硕士研究生,houxiangying@126.com

    通讯作者:

    方宗德,教授,博士生导师,fauto@nwpu.edu.cn

Pretreatment and Post Treatment of Tooth Contact Analysis Based on ABAQUS

  • 摘要: 为了在使用ABAQUS进行齿轮接触分析时,减少手动工作量,提高结果文件的可读性,提出采用inp文件进行前处理的方法进行建模、装配和条件设置,并利用ABAQUS脚本文件对计算结果进行提取。采用Matlab等软件编写生成inp文件,并对提取的结果进行数据处理。使前处理避免了手动操作,并能在计算完成后提取齿轮重要性能参数接触印痕和应力曲线。
  • [1] 王翔,黄威,李进.基于ANSYS的复合材料齿轮的有限元分析[J].武汉大学学报,2012,58(3):215-220 Wang X, Huang W, Li J. Finite element analysis of composite gear based on ANSYS[J]. Journal of Wuhan University, 2012,58(3):215-220 (in Chinese)
    [2] 唐进元,刘艳平.直齿面齿轮加载啮合有限元仿真分析[J].机械工程学报,2012,48(5):124-131 Tang J Y, Liu Y P. Loaded meshing simulation of face-gear drive with spur involute pinion based on finite element analysis[J]. Journal of Mechanical Engineering, 2012,48(5):124-131 (in Chinese)
    [3] 郝东升,王德伦.斜齿轮精确接触分析有限元建模方[J].大连理工大学学报,2011,51(6):825-831 Hao D S, Wang D L. An approach to building a FEM of helical gears with accuracy contact analysis[J]. Journal of Dalian University of Technology, 2011,51(6):825-831 (in Chinese)
    [4] Litvin F L. Gear geometry and applied theory[M]. Cambridge University Press, 2004
    [5] Sheveleva G I, Volkov A E, Medyedev V I. Algorithms for analysis of meshing and contact of spiral bevel gear [J].Mechanism and Machine Theory, 2007,42(2):198-215
    [6] 曹金凤,王旭春,孔亮.Python语言在Abaqus中的应用[M].北京:机械工业出版社,2011 Cao J F, Wang X C, Kong L. Application of python based on abaqus[M]. Beijing: China Machine Press, 2011 (in Chinese)
    [7] Gonzalez-Perez I, Iserte J L, Fuentes A. Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact[J]. Mechanism and Machine Theory, 2011,46(6):765-783
    [8] 周岭.基于Pro/E精确建模的渐开线直齿轮应力有限元分析[D].兰州:兰州交通大学,2009 Zhou L. The Finite element analysis of stresses in involute spur gear based on the accurately modeling by Pro/E[D]. Lanzhou: Lanzhou Jiaotong University, 2009 (in Chinese)
    [9] Lin T, Ou H, Li R. A finite element method for 3D static and dynamic contact/impact analysis of gear drives[J]. Computer Methods in Applied Mechanics and Engineering, 2007,196(9):1716-1728
    [10] 胡安庆.基于ABAOUS的配气机构有限元分析及其二次开发应用研究[D].杭州:浙江大学,2012 Hu A Q. The application research of valve train finite element analysis and its secondary development based on ABAOUS[D]. Hangzhou: Zhejiang University, 2012 (in Chinese)
    [11] 唐进元,蒲太平.加载螺旋锥齿轮接触轨迹变化规律的研究[J].机械科学与技术,2010,29(4):461-466 Tang J Y, Pu T P. A study of contact path variation of a loaded spiral bevel gear[J]. Mechanical Science and Technology for Aerospace Engineering, 2010,29(4):461-466 (in Chinese)
    [12] 祝政委.弧齿锥齿轮参数化设计及有限元分析[D].合肥:合肥工业大学,2012 Zhu Z W. Parametric design and finite element analysis of spiral bevel gears[D]. Hefei: Hefei University of Technology, 2012 (in Chinese)
    [13] 罗齐汉,李成刚,厉海祥,等.齿轮弯曲强度有限元精确分析方法研究[J].机械科学与技术,2007,26(9):1212-1215 Luo Q H, Li C G, Li H X, et al. Research on accurate analysis method for bending strength of gear using finite element analysis(FEA)[J]. Mechanical Science and Technology for Aerospace Engineering,2007,26(9):1212-1215 (in Chinese)
    [14] 李杰,张磊,赵旗,等.斜齿轮三维弯曲有限元模型及应力分析[J].沈阳工业大学学报,2011,33(3):265-269 Li J, Zhang L, Zhao Q, et al. hree-dimensional bending finite element model and stress analysis of helical gear[J]. Journal of Shenyang University of Technology, 2011,33(3):265-269 (in Chinese)
    [15] 孟凡净,周哲波.弧齿直齿轮和斜齿轮啮合的数学建模及实体造型的实现[J].机械科学与技术,2011,30(4):656-660 Meng F J, Zhou Z B. Building the mathematical model and realizing the entity shaping for the arc tooth of vertical and inclined gears[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(4):656-660 (in Chinese)
  • 加载中
计量
  • 文章访问数:  214
  • HTML全文浏览量:  27
  • PDF下载量:  19
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-12-04
  • 刊出日期:  2015-07-05

目录

    /

    返回文章
    返回