基于可拓学的刨床刨刀往复运动机构设计

唐文艳; 张晓伟; 李苏洋; 王冠; 杨春燕

doi:10.13433/j.cnki.1003-8728.2014.0606

基于可拓学的刨床刨刀往复运动机构设计

doi: 10.13433/j.cnki.1003-8728.2014.0606

1.
广东工业大学,机电工程学院广州 510006;
2.
广东工业大学,可拓学与创新方法研究所广州 510006

基金项目:

国家科技部创新方法工作专项项目(2011IM020300)

广东省省部产学研结合项目(2011A091000040)

广东省科技计划项目(2011A060901001,2012B061000011)

广东省创新方法工作专项项目(2011B061100001)资助

详细信息

作者简介:
唐文艳(1973-)，副教授，博士，研究方向为计算力学和创新方法，twysyb@gdut.edu.cn

计量
- 文章访问数: 129
- HTML全文浏览量: 17
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2012-10-29
- 刊出日期: 2015-06-10

Design of reciprocating Motion Mechanism for Plane Blade of Planer Based on Extenics

1.
Faculty of Electromechanical Engineering,Guangdong University of Technology, Guangzhou 510006;
2.
research Institute of Extenics and Innovation Methods,Guangdong University of Technology,Guangzhou 510006

摘要

摘要: 基于可拓学的可拓策略生成方法,提出了机械运动方案设计中,机构选型的确定方法。建立问题的可拓模型和核模型,通过拓展分析、可拓变换,生成解决矛盾问题的多种策略,并建立评价标准,对生成的各策略进行优度评价。以实现刨床刨刀往复运动机构的选型过程为例证明该方法的有效性。
- 可拓学 /
- 可拓变换 /
- 可拓策略 /
- 刨刀
Abstract: The paper presents a method of mechanism selection during mechanical design scheme on the basis ofextenics. The original and kernel models for the problem are built according to extension strategy generating.Several of strategies solving the contradiction are generated by extension analysis and extension transformation. Thestrategies are assessed by means of the excellent degree evaluation. The feasibility and effectiveness of the proposedmethod are verified by the selection of reciprocating motion mechanism for plane blade of planer.
- design /
- efficiency /
- extenics /
- extension strategy

HTML全文

参考文献(12)

[1]	two-level fuzzy synthesis judgments in mechanism selection[J]. Journal of Engineering Design,2007,14(4): 278-281 (in Chinese)
[2]	陆凤仪．机械原理课程设计[M]. 北京: 机械工业出版社,2002Lu F Y．Project on fundamentals of machine design [M]. Beijing: Machine-building Industry Press,2002(in Chinese)
[3]	明勇,李世六,陈进．车载式回转起竖平台起竖执行机构选型分析[J]. 后勤工程学院学报,2008,24(4):30-34Ming Y,Li S L,Chen J．Analysis on lift mechanism of vehicle-mounted circumgyration lift flat[J]. Journal of Logistical Engineering University,2008,24 (4): 30-34(in Chinese)
[4]	陶柯,李丹,钱建徐,等．轮胎试验机的运动机构选型及仿真[J]. 机械工程师，2006，(12):86-87Tao K,Li D,Qian J X,et al．Selectness and simulation of movement mechanism of tire test mechine[J]. Mechanical Engineer，2006，(12):86-87 (in Chinese)
[5]	刘开第,庞彦军,郝继梅．机构选型的改进多级模糊综合评判[J]. 工程设计学报,2009,16(2): 88-92 liu K D,Pang Y J,Hao J M．Improved multi-level fuzzy comprehensive evaluation for mechanism selection[J]. Journal of Engineering Design,2009,16(2): 88-92(in Chinese)
[6]	成经平．机械系统概念设计的机构选型模糊综合评价[J]. 机械设计与研究,2001,17(4): 15-17Cheng J P．Fuzzy synthetical evaluation for selecting mechanism types on conceptual design of mechanical system[J]. Machine Design and research,2001,17(4): 15-17 (in Chinese)
[7]	彭安华,杨刚刚．基于层次分析法的二级模糊综合评判在机构选型中的应用[J]. 工程设计学报,2007,14(4): 278-281Peng A H,Yang G G．Application of AHP based on
[8]	曹庆奎,魏效玲,苏天佑,等．机构选型决策模型[J].机械设计,2003,20(7): 40-41Cao Q K,Wei X L,Su T Y,et al．Policy decision model for type selection of mechanism [J]. Journal of Machine Design,2003,20(7): 40-41 (in Chinese)
[9]	李立希,杨春燕,李铧汶．可拓策略生成系统[M]. 北京: 科学出版社,2006Li L X,Yang C Y,Li Y W．Extension strategy generation system[M]. Beijing: Science Press,2006 (in Chinese)
[10]	杨春燕,蔡文．可拓工程[M]. 北京: 科学出版社,2007Yang C Y,Cai W．Extension engineering [M]. Beijing: Science Press,2007 (in Chinese)
[11]	李承晓,李卫华．租房可拓策略生成系统[J]. 智能系统学报,2011,6(3): 272-278Li C X,Li W H．research on a tenement extension strategy generation system[J]. CAAL Transactions on Intelligent Systems,2011,6(3): 272-278 (in Chinese)
[12]	方卓君,李卫华,李承晓．自助游可拓策略生成系统的研究与实现[J]. 广东工业大学学报，2009，26(2):83-89Fang Z J,Li W H,Li C X．research and realization of extension strategy generating system for independent travel [J]. Journal of Guangdong University of Technology,2009,26(2): 83-89 (in Chinese)