Study on Identification of Concentrated Dynamic Load for Multibody System
-
摘要: 采用考虑刚柔耦合的混合坐标系法和传统的运动弹性动力学(KED)方法,对由悬臂梁和旋转梁组成的简单多体系统进行正问题建模,求旋转梁在集中动载荷作用下的正响应。基于这两种不同的建模方法,在时域内,采用一维切比雪夫正交多项式拟合,推导出多体系统的动态标定矩阵,对作用于旋转梁上的载荷进行识别。通过一仿真算例,对基于不同正问题建模方法的识别结果进行对比,分析出刚柔耦合对识别结果的影响,以及正交多项式拟合法,对此非线性系统进行动态识别的局限性。并且,对于变速工况,给出了滤除驱动力矩影响的方法,识别结果得到改善。Abstract: In the paper,we describe the multibody system consist of cantilever beam and rotating beam base on two different methods.One is hybird coordinate method which takes the rigid-flexible coupled into account.The other is traditional Kineto-Elasto-Dynamic(KED) method.The dynamic calibration matrix is derive in time domain by introducing chebyshev polynominal to identify the concentrated dynamic load exerted on the rotating beam.The identification results are compare base on different modeling methods through a simulation example.We can analyse the limitation of this identificaion way for nonlinear system and the effect of rigid-flexible coupling on the load identification caused by nonlinear factors.And we propose a new method to remove the response caused by driving moment to improve the identification accuracy.
-
Key words:
- multibody system /
- load identification /
- hybird coordinate method /
- KED
-
[1] 洪嘉振.计算多体系统动力学[M].北京:高等教育出版社,1989 [2] 陆佑方.柔性多体系统动力学[M].北京:高等教育出版社,1996 [3] Kane T R,Ryan R R,Banerjee A K.Dynamic of a cantileverbeam attached to a moving base[J].Journal of Cuidance,Con-trol and Dynamics,1987,10(2):139～151 [4] Shabana A A.Dynamic of Multibody System[M].CambridgeUniversity Press,1998 [5] 余跃庆,李哲.现代机械动力学[M].北京:北京工业大学出版社,1998 [6] Arieh Iseries.微分方程数值分析基础教程[M].北京:清华大学出版社,2004 [7] 王建明,洪嘉振.柔性多体系统动力学实验研究[J].宇航学报,1999,20(2) [8] Hasting G G,Book W J.A linear dynamic model for flexible ro-botic manipulations[J].IEEE Control Systems Magazine,1987,7(1):61～64 [9] 徐梅.复杂结构分布载荷识别的动态标定技术研究[D].南京:南京航空航天大学,2010 -
点击查看大图
计量
- 文章访问数: 123
- HTML全文浏览量: 11
- PDF下载量: 3
- 被引次数: 0
下载:
