三滚子结构夹持的直线型超声电机

基金项目:

国家自然科学基金重点项目(50735002)

江苏省自然基金重点项目(BK2007725)资助

A Linear Ultrasonic Motor Clamped with Three-roller Clamping Scheme

1.
Institute of Precision Driving, Nanjing University of Aeronautics and Astronautics, Nanjing 210016

摘要: 针对目前直线超声电机夹持装置存在的问题,提出了合理的夹持装置应满足的条件,并针对V型定子设计了新的夹持结构,基于三滚子结构的夹持方案。通过电机的机械特性的测试及对比分析可以得出,新的夹持结构下电机的输出力得到显著提高,最大输出力由原来的20 N增至26.8 N。提出将电机的速度波动作为衡量其性能稳定性的指标,通过对比试验分析了影响电机性能稳定性的因素,并提出了改善电机稳定性的方法。
- 直线超声电机 /
- 夹持装置 /
- 稳定性
Abstract: This paper analyzes the problems existing in the clamping device of a linear ultrasonic motor,proposes the conditions that a reasonable clamping device should meet,and designs a new device for clamping a V-shape stator by using the three-roller clamping scheme.The mechanical properties of the linear ultrasonic motor are tested and the test results are compared.The comparison results show that our new clamping device significantly increases the linear ultrasonic motor's output force,with its maximum output force increasing from 20 N to 26.8 N.The paper proposes that the speed fluctuation of the linear ultrasonic motor should be used to assess its stability,analyzes the factors that may influence its stability and finally puts forward our method for enhancing its stability.
- linear ultrasonic motor /
- clamping device /
- stability

[1]	赵淳生.超声电机技术与应用[M].北京:科学出版社,2007
[2]	Pozzi M,King T.Piezoelectric actuators in micropositioning[J].Engineering Science and Education Journal,2001,10(3)
[3]	陈永校,郭吉丰.超声波电动机[M].浙江:浙江大学出版社,1994
[4]	黄卫清,孟益民.一种新型非共振压电直线电机的设计[J].中国机械工程,2009,(14)
[5]	杨东.双变幅杆V型直线超声电机研究[D].南京航空航天大学,2009
[6]	李玉宝.新型直线型超声电机及其应用的研究[D].南京航空航天大学,2009