Development of High Speed Hybrid Ceramic Bearing for Tank Engine Turbocharger
-
摘要: 通过确定混合陶瓷轴承设计的目标函数及约束条件,采用功效系数的方法并结合计算机辅助编程完成了轴承的优化设计。对混合陶瓷轴承和滑动轴承的发热量做了对比分析,证明了混合陶瓷轴承发热量明显低于滑动轴承。进行了涡轮增压器混合陶瓷轴承台架实验,实验结果表明,采用混合陶瓷轴承后,涡轮增压器的总效率提高5%～8%,极限转速提高至120000 r/min。Abstract: In this study, the objective function and constraints of the hybrid ceramic bearing mined; the optimal design of the bearing was completed using the efficiency coefficient method design was deter-combining with the computer-aided program. Through the comparative analysis of the heat productivity of hybrid ceramic rolling bearing and sliding bearings, the former's was significantly lower than the latter's, thus the hybrid ceramic rolling beating proved its advantages. The ciency increased 5% ~ 8% bench test of engine turboeharger hybrid ceramic bearing showed that the overall effi-and its limit speed increased up to 120 000 r/min.
-
Key words:
- turbocharger /
- high speed /
- ceramic bearing /
- design /
- bench test
-
[1] Nathan Katz R,James G Han-noosh.Ceramics for high perform-ance rolling element bearings[J].Materials and Design,1987,8(2):108～112 [2] GAMET Bearing Super Precision Rolling Bearings[M].Pro-duced by BCA,1997 [3] 朱大鑫.涡轮增压与涡轮增压器[M].兵器工程第70研究所,1997:63～76 [4] 万长森.滚动轴承的分析方法[M].北京:机械工业出版社,1984:299～304 [5] 蒋兴奇.主轴轴承热特性及对速度和动力学性能的影响研究[D].浙江大学,2007 [6] 杨咸启.高速角接触球轴承优化设计[J].轴承,2000,(1):1～3 [7] 王东峰,叶军,杨伯原.双列角接触球轴承的多目标优化设计[J].轴承,2007,(8):8～10 [8] 肖曙红,黄晓明,张柏林.高速角接触球轴承发热及其影响因素[J].机床与液压,2004,(12):17～19 [9] 徐建宁.止推滑动轴承的温度场和热变形分析[J].润滑与密封,2006,(8):120～121 [10] 刘祖柏.不同海拔下汽车涡轮增压器柴油机性能研究[D].上海海事大学,2006 -
点击查看大图
计量
- 文章访问数: 152
- HTML全文浏览量: 27
- PDF下载量: 3
- 被引次数: 0
下载:
