|
|
Articles:2021,Vol:26,Issue(3):180-192 |
|
|
Citation: |
|
|
LIN Feng. Layout and Simulation Design of Intelligent Manufacturing Production Line via Visualone[J]. International Journal of Plant Engineering and Management, 2021, 26(3): 180-192 |
|
|
|
|
|
|
|
| Layout and Simulation Design of Intelligent Manufacturing Production Line via Visualone |
|
| LIN Feng |
|
| Department of Mechanical and Electrical Engineering, Fuzhou Polytechnic, Fuzhou 350108, China |
| Abstract: |
| NC machining of parts and components is developing in the direction of automation and intelligence. In addition, the automatic production line puts forward higher requirements for the overall layout, technological process and production tempo. The layout and simulation of the production line can more directly reflect the problems that may occur in the operation of the production line, and solve these problems through scientific methods. This project uses VisualOne software to simulate the operation of the intelligent manufacturing production line, which can directly find the existing problems in the layout of the production line and the process of the craftsmen, and optimize the layout of the production line. In addition, it can provide reliable support for the equipment procurement and on-site construction of the intelligent manufacturing automation production line in the later stage. |
| Key words:
production line
intelligent manufacturing
automation
layout
simulation
|
|
| Received: 2021-04-11
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2021.0304 |
| Funds: This paper was supported by 2019 Project of the 13th Five-year Plan of Fujian Education and Science (FJJKCGZ19-016) |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] CAO X H, HAN Y L. Exploration and practice of intelligent industry factory in the context of the combination[J]. Inorganic Salt Industry, 2019,51(5):1-5(in Chinese)
[2] LI Y, DING S Y, HE Y J, et al. Layout design and optimization of assembly line according to simulation[J]. Manufacturing Technology and Machine Tools, 2021(1):51-55(in Chinese)
[3] ZHANG X W, LYU R Q, Bu Y, et al. Planning and optimization of aircraft conduit automation production line according to simulation[J]. Aviation Manufacturing Technology, 2021,64(5):82-88(in Chinese)
[4] LEI Y, DENG C Z, HE W. The layout planning of the machine factory[J]. Engineering Machinery, 2019,50(4):37-44(in Chinese)
[5] LIN Z, WEI H B, ZHANG J W, et al. Talking about the course construction of "installation and debugging of automatic production line"[J]. Science and Technology of Radio and TV University, 2010(3):65-67(in Chinese) |
|
|
|
|
|
|
|
