|
|
Contents:2019,Vol:24,Issue(2):120-125 |
|
|
Citation: |
|
|
LIU Xinshang. The Use of Damage Modes in Periodic Inspecting Autoclave[J]. International Journal of Plant Engineering and Management, 2019, 24(2): 120-125 |
|
|
|
|
|
|
|
| The Use of Damage Modes in Periodic Inspecting Autoclave |
|
| LIU Xinshang |
|
| Zhumadian Branch of Boiler and Pressure Vessel Safety Inspection Institute of Henan Province, He'nan Zhumadian 463000, China |
| Abstract: |
| According to the operation characteristics of autoclave, the possible defects are analyzed by damage modes, the inspection methods are selected contrapuntally, and the causes of the defects affecting the safe operation of the equipment are analyzed. This study effectively improves the quality of inspection work and plays an important role in strengthening the management of equipment use and reducing accidents. |
| Key words:
damage modes
autoclave
inspection
defect
pressure vessel
|
|
| Received: 2019-01-11
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2019.0208 |
| Corresponding author:
Email： |
| Author description: LIU Xinshan is a senior engineer, dean and technical director, Zhumadian Branch of Boiler and Pressure Vessel Safety Inspection Institute of Henan Province. His research direction is the research and testing of safety and energy saving technology for special pressure equipment. 13333967281@163.com
|
|
|
|
|
|
|
|
References: |
|
|
[1] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. TSG 21-2016 regulations for safety and technical supervision of fixed pressure vessels[S]. Beijing:Xinhua Publishing House, 2016(in Chinese)
[2] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. TSG R7001-2013 regular inspection rules for pressure vessels[S]. Beijing:Xinhua Publishing House, 2013(in Chinese)
[3] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. TSG 08-2017 rules for the use and management of special equipment[S]. Beijing:Xinhua Publishing House, 2017(in Chinese)
[4] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.GB/T30579-2014 pressure equipment damage pattern recognition[S].Beijing:China Standards Press, 2014(in Chinese)
[5] Energy Bureau of the People's Republic of China. NB/T4017.1-47013.6-2015 nondestructive testing of pressure equipment[S]. Beijing:Xinhua Publishing House, 2015(in Chinese)
[6] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB 150.1-150.4-2011 pressure vessels[S]. Beijing:China Standards Press, 2011(in Chinese)
[7] Ministry of Industry and Information Technology of the People's Republic of China. JC/T 720-2011 autoclave[S]. Beijing:China Building Materials Industry Press, 2011(in Chinese)
[8] General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. TSG R7004-2013 supervision and inspection rules for pressure vessels[S]. Beijing:Xinhua Publishing House, 2013(in Chinese)
[9] Xu G F, Wang F, Zhao Z M. Periodic inspection of silicate autoclave based on safety failure analysis[J]. Chemical Engineering and Equipment, 2016(05):242-244(in Chinese)
[10] Mao X B. Key points of regular inspection of quick open pressure vessels-autoclave[J]. Technology and Innovation, 2015(18):110-110(in Chinese)
[11] Zhou Y Y. Working characteristics and failure mode of autoclave[J]. Equipment Manufacturing Technology, 2012(10):202-204(in Chinese)
[12] Li K H, Chen G L. On regular inspection of small and medium-sized enterprises[J]. Autoclave, 2010(12):322I-322(in Chinese)
[13] Lu L X, Kong L C, Chen W M. Parking inspection and crack analysis in autoclave[J]. Chemical Engineering and Equipment, 2014(1):75-76(in Chinese)
[14] Huang H, Lu L M, Huang Y Y, et al. Testing and research on flange root crack of autoclave body[J]. Enterprise Technology Development, 2013,32(10):54-55(in Chinese)
[15] Cao F F, Jian Z L, Huang S W. Cause analysis of an autoclave explosion accident[J]. Chemical Engineering and Equipment, 2011(5):178-179(in Chinese)
[16] Wu H W. Analysis of common accidents in autoclaves and preventive measures[J] China Science and Technology Vertical and Transverse, 2013(4):124-125(in Chinese)
[17] Ye J W, Xiang X Y, Peng T Y, et al. Necessity of compulsory inspection of fast-opening interlocking device of autoclave[J]. Safety Technology of Special Equipment in China, 2016,32(7):30-34(in Chinese) |
|
|
|
|
|
|
|
