|
|
Articles:2018,Vol:23,Issue(3):134-148 |
|
|
Citation: |
|
|
ZHAO Zixiang, FAN Xiaobin, LIU Xiaoping. A Review of Data Acquisition System based on LabVIEW[J]. International Journal of Plant Engineering and Management, 2018, 23(3): 134-148 |
|
|
|
|
|
|
|
| A Review of Data Acquisition System based on LabVIEW |
|
| ZHAO Zixiang, FAN Xiaobin, LIU Xiaoping |
|
| School of Mechanical and Power Engineering, Henan Polytechnic University, He'nan Jiaozuo 454000, China |
| Abstract: |
| With the continuous development and expansion of automotive industry, car safety problems are widely concerned by most of us. In order to make it easier to adjust car's real-time body posture, it is necessary to design a real-time data acquisition system, thus reducing the number of casualties in normal driving. A brief account of the development status of data acquisition system at home and abroad, and the concept, principle, function of virtual instrument platform are given. The advantages and disadvantages of the data acquisition system, based on LabVIEW in different methods of data acquisition, are analyzed and compared, and put forward some improvements and optimization, so the real-time data acquisition system can meet the requirement of adjusting the state of the vehicle, improving real-time of data acquisition and processing. Finally, it indicates the development direction and prospect of data acquisition system based on LabVIEW. |
| Key words:
data acquisition system
virtual instrument
body posture
LabVIEW
data acquisition and processing
|
|
| Received: 2017-05-12
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2018.0302 |
| Funds: This paper is supported by Key Scientific Research Project of Henan Province (17A580003), Key Scientific and Technological Project of Henan Province (172102210022) and Henan Polytechnic University Education Teaching Reform Research Projects (2015JG034) |
| Corresponding author:
Email： |
Author description: ZHAO Zixiang is a postgraduate student in Henan Polytechnic University. His research interest is vehicle dynamics and the control. 735339219@qq.com
FAN Xiaobin is a Ph.D and an associate professor in School of Mechanical and Power Engineering, Henan Polytechnic University. His research interests include automotive system dynamics and control, noise and vibration control. fanxiaobin@hpu.edu.cn
LIU Xiaoping is a postgraduate student in Henan Polytechnic University. Her research interest is vehicle dynamics and the control. 994156689@qq.com
|
|
|
|
|
|
|
|
References: |
|
|
[1] Xiao Z. Microprocessor in the application of electrical measurement technology[J]. Industrial Metrology, 1994,(4):26-27(in Chinese)
[2] Chen L P, Li C. Study and research on data acquisition system[J]. Computer Knowledge and Technology, 2015,11(17):4-5(in Chinese)
[3] Zhao M, Hu T L, Zhang Q, et al. Design and research of AMT data acquisition system based on LabVIEW[J]. Journal of Shandong University (Engineering Science), 2011,41(6):70-74+79(in Chinese)
[4] Dong Y L, Chen H Y. Data acquisition and analysis system for vehicle AMT[J]. Industrial Instrumentation & Automation Devices, 2003,(4):46-48(in Chinese)
[5] Zhou Q Y, Wang J X. Design of data acquisition system based on USB interface and LabVIEW[J]. Laboratory Research and Exploration, 2011, 30(8):238-240(in Chinese)
[6] Zheng Y J, Huang W G, Zhang D. Real-time data acquisition system based on LabVIEW and USB interface[J]. Electronic Technology, 2009, 36(12):76-78(in Chinese)
[7] Du J, Qiu X H, Zhao Y, et al. Design of data acquisition and signal processing system based on LabVIEW[J]. Journal of Nanjing Normal University, 2010,10(3):7-10(in Chinese)
[8] Zhang Y, Chang Y. Study on data acquisition system calibration[J]. Electronic Measurement Technology, 2012,35(8):98-102+111(in Chinese)
[9] Shao Z S, Huang M. Speed measuring experiment system based on LabVIEW[J]. Advanced Materials Research, 2013,744:540-543(in Chinese)
[10] Liao C S, Han P. Implementation of USB data acquisition system based on LabVIEW[J]. Industrial Control Computer, 2004,(7):23-24(in Chinese)
[11] Gao C J, Li S Y. Signal output and data acquisition system based on LabVIEW[J]. Microcomputer Information, 2008,24(19):135-136(in Chinese)
[12] Yang L P, Li H T, Yang L. LabVIEW programming and application[M]. 2nd edition. Beijing:Electronic Industry Press, 2005(in Chinese)
[13] Zhang Y C, Wang Y P. Distributed data acquisition system based on can bus[J]. Instrument Technique and Sensor, 2010,(12):53-55(in Chinese)
[14] Li J H, Qiu C L, Tian D, et al. Design and implementation of data acquisition system based on can bus[J]. Journal of Jilin University, 2004,22(2):134-137(in Chinese)
[15] Lin J Y, Qin Y C. Data acquisition system based on can bus[J]. Ningxia Engineering & Technology, 2002,1(2):176-178(in Chinese)
[16] Wu Z L, Ji H, Chen C X, et al. Design of micro-data acquisition system based on CAN bus[J]. Automation Instrumentation, 2013,34(2):49-51+55(in Chinese)
[17] Luo W G, Chen Q Y. Measurement data of automobile based on can bus[J]. Automation Technology & Applications, 2012,31(12):86-88(in Chinese)
[18] Zhu H B, Kang L Y, Yang H Z. Design of data acquisition system for compound energy electric vehicle based on LabVIEW[J]. Measurement and Control Technology, 2011, 30(8):19-22
[19] Li M Y, Peng Y Q. Design of automobile data acquisition system based on LabVIEW[C]//Sichuan Automobile Academic Conference, Chengdu:China Academic Journal Electronic Publishing House, 2013:407-412(in Chinese)
[20] Li H B, Wan Y. Study on active data acquisition and signal connection based on LabVIEW[J]. Industrial Control Computer, 2005,(1):64-65
[21] Liu X M. Development of real-time test system for USB multi-channel counting based on LabVIEW[J]. Standardization and Measurement of Instrumentation, 2005,(6):19-20+32(in Chinese)
[22] Li T, Lei W Z. Study on data acquisition system based on LabVIEW[J]. Mining Industry Automation, 2010,36(11):121-124(in Chinese)
[23] Qi F Q, Chi Z T. Data acquisition and processing systems based on LabVIEW[J]. Applied Mechanics and Materials, 2014,602-605:2736-2739(in Chinese)
[24] Li S Z. Design and analysis of multi-channel data acquisition and analysis system based on LabVIEW[J]. Communication Power Technology, 2016,(3):95-96(in Chinese)
[25] Yu Z R, Yang L. Application of USB interface based on NI-VISA and LabVIEW[J]. Application of Single Chip Microcomputer and Embedded System, 2007,(1):66-69(in Chinese) |
|
|
|
|
|
|
|
