HUANG He, LIU Fu-hua, FENG Guo-qun, LIU Liang, CHEN Qing-lin. Research and Development on NC System of Gear-hobbing Machine based on Zero-programming Technology[J]. International Journal of Plant Engineering and Management, 2016, 21(4): 241-254

Research and Development on NC System of Gear-hobbing Machine based on Zero-programming Technology
HUANG He1, LIU Fu-hua1, FENG Guo-qun1, LIU Liang1, CHEN Qing-lin2
1 Yibin Vocational and Technical College, Sichuan Yibin 644003, P. R. China;
2 Yibin Push Machine Tool Co., LTD, Sichuan Yibin 644000, P. R. China
By the analysis of roller gear processing technology, combining with gear meshing mechanism and motion relationship, models for rolling gear machining parameter and zero-programming are established. In this paper, the automatic generation technology of NC program for CNC gear machining process has been studied and the zero-programming system architecture of open CNC gear-hobbing machine has been presented. In the design and development of the system, human computer interaction, programming algorithm and the design of each function module have bean done. Application test shows that the expected design requirements have been achieved.
Key words:    CNC gear-hobbing machine    zero-programming    open CNC    system development   
Received: 2016-09-15     Revised:
DOI: 10.13434/j.cnki.1007-4546.2016.0405
Funds: This work was supported by the Natural Science Foundation of Sichuan Province Education Department(16ZB0551); College enterprise cooperation research project(ybzysc14-10)
Corresponding author:     Email:
Author description:
PDF(593KB) Free
LIU Fu-hua
FENG Guo-qun
LIU Liang
CHEN Qing-lin

[1] Huang He, Liu F H, Zeng X, et al. The development trend of hobbing machining equipment and technology[J]. Modern Machinery, 2015,12(6):85-88(in Chinese)
[2] Jiang G Y. The research on hobbing machine NC systems zero-programming techniques[D]. Shenyang:Shenyang Ligong University, 2013(in Chinese)
[3] Li F G. Research and development on automatic programming system for CNC gear hobbing[D]. Hefei:Hefei University of Technology, 2013(in Chinese)
[4] Kang L. Research and application on NC zero-programming for gear hobbing[D]. Chongqing:Chongqing University, 2007(in Chinese)
[5] Huang H, Wang F M, Zhao X F, et al. Research of PC-based open architecture CNC[J]. Machinery Design & Manufacture, 2009,6(6):191-193(in Chinese)
[6] Huang Q, Zhang G B, Liu R A. Research on R&D strategy and system architecture for open-CNC system in gear-hobbing machine[J]. Machine Tool & Hydraulics, 2006,1(1):15-18(in Chinese)