|
|
Articles:2013,Vol:18,Issue(4):221-230 |
|
|
Citation: |
|
|
QIN Xian, JIANG Yong-jian, DENG Jia-ming. Motion Characteristic Analysis of a Parallel Mechanism with 2-DOF for Industrial Fan Blades' Scribing[J]. International Journal of Plant Engineering and Management, 2013, 18(4): 221-230 |
|
|
|
|
|
|
|
| Motion Characteristic Analysis of a Parallel Mechanism with 2-DOF for Industrial Fan Blades' Scribing |
|
| QIN Xian, JIANG Yong-jian, DENG Jia-ming |
|
| College of Mechanical Engineer,Changzhou University,Changzhou 213016, P.R. China |
| Abstract: |
| With the application background of 16 inch industrial fan blades' scribing process,a simple and practical 2-DOF parallel plane scribing device is proposed to replace the traditional manual scribing. The direct and inverse kinematics solutions,workspace and singular configuration of the mechanism are analyzed and solved. Some contour curve equations are fitted based on the data points which are measured by a three coordinate measuring machine. According to the blade's contour curve,each input link's motion characteristic is obtained by using MATLAB,which provides a new way to realize blades' automatic scribing process technology. |
| Key words:
industrial fan blades
parallel mechanism
motion characteristic analysis
MATLAB simulation a-nalysis
|
|
| Received: 2013-09-08
Revised:
|
| DOI: |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Sun G W. Tool manual of fitter[M]. Henan Science and Technology Press,2009 (in Chi-nese)
[2] Xu P Y. The control system design of 3-coordi-nate automatic scribing machine[D]. Hebei Agriculture University,2009 (in Chinese)
[3] Xiong J G. Application and development trend of industrial robots[J]. Scientific Field, 2006,166(1) (in Chinese)
[4] Zhao X M,Zhang L. Working space of parallel mechanisms and its approximate representation [J]. Journal of Shanghai Jiaotong University,2004, 38(6):1007-1076 (in Chinese)
[5] Zhong Y,Zhu J X. A new method for solving work space of the robot[J]. Machine Tool & Hydraulics,2004, 4:66-67 (in Chinese)
[6] Cong S,Ma X,Zhang Y X. Application of LMI in the analysis and design of singularity,dexterity and rigidity of parallel mechanism [J]. Journal of Machine Design,2005,22 (12):10-12 (in Chinese)
[7] Xu Z G,Hao X Q,Dong M. Singularity analy-sis of 3-PCR parallel mechanism[J]. Journal of Shandong University of Technology,2009,23(1):20-23 (in Chinese) |
|
|
|
|
|
|
|
