论文:2018,Vol:36,Issue(3):464-470
引用本文:
张益雷, 胡志力, 李锦, 戴明亮. 双离合器盘毂冲挤成形中的小圆角填充规律研究[J]. 西北工业大学学报
Zhang Yilei, Hu Zhili, Li Jin, Dai Mingliang. Exploring Filling Law of Small Fillet of Dual Clutch Hub[J]. Northwestern polytechnical university

双离合器盘毂冲挤成形中的小圆角填充规律研究
张益雷1,2, 胡志力1,2, 李锦1,2, 戴明亮1,2
1. 现代汽车零部件技术湖北省重点实验室, 武汉理工大学, 湖北 武汉 430070;
2. 汽车零部件技术湖北省协同创新中心, 湖北 武汉 430070
摘要:
小圆角齿形双离合器盘毂在冲挤过程中,往往由于成形阻力大而致使小圆角齿形填充不完全。提出一种将坯料预制成内凹型的预成形方法,采用力学分析和有限元模拟对内凹型预制坯促进圆角填充进行分析,利用冲挤复合成形技术成形双离合器盘毂件,使用deform对预成形工件挤齿过程进行数值模拟,分析预制坯几何参数对成形质量的影响规律,利用BP神经网络建立预制坯几何参数和齿形圆角未填充宽度之间的映射关系,运用多目标遗传优化算法对预制坯几何参数进行了优化。结果表明,当坯料形状截面为内凹形的时候,因坯料与模具接触面积减少从而使摩擦阻力减小,同时对坯料产生切向推力,小圆角齿形填充较好;BP神经网络结合遗传算法能够可靠地优化预制坯几何参数,优化后圆角齿形填充性能得到了改善,提高了双离合器盘毂件成形质量。根据模拟结果进行试制,验证了工艺的可行性和模拟的准确性。
关键词:    双离合器毂    小圆角    冲挤复合成形    预成形   
Exploring Filling Law of Small Fillet of Dual Clutch Hub
Zhang Yilei1,2, Hu Zhili1,2, Li Jin1,2, Dai Mingliang1,2
1. Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China;
2. Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan 430070, China
Abstract:
In extruding the dual clutch hub with small fillet gear, the filling of small fillet gear is not complete due to the large forming resistance. A method of preforming the blank into a concave shape is proposed. The mechanical analysis and finite element simulation are used to analyze the principle that the blank of concave shape can promote the filling of small fillet gear, stamping and extruding are both used to form the dual clutch hub and the preform is used to simulate the fillet gear's extruding to analyze the influence of the geometric parameters of the preform on the forming quality. The mapping relationship between the geometric parameters of the preform and the size of unfilled fillet gear is established by using the BP neural network. The multi-objective genetic algorithm is used to optimize the geometric parameters of the preform. From the results we can see that the frictional resistance decreases due to reduced contact area between the blank and the mold when the section shape of the blank is concave, and at the same time, the tangential thrust is generated on the blank, so the filling of small fillet gear is better; BP neural network combined with genetic algorithm can reliably optimize the geometric parameters of the preform. The filling performance of the fillet gear is better under the optimal preform, and the forming quality of the dual clutch hub is improved. The experimental result verified the feasibility of the method and the accuracy of the simulation.
Key words:    dual-clutch hub    small fillet    stamping-extruding forming process    preform   
收稿日期: 2017-04-15     修回日期:
DOI:
基金项目: 铝合金轻量化汽车转向节精锻关键技术研究与开发(2016AAA054)、国家自然科学基金(51405358)、中国汽车产业创新发展联合基金(U1564202)、中国博士后科学基金(2015T80844)资助
通讯作者: 胡志力(1983-),武汉理工大学副教授,主要从事汽车轻量化技术研究。邮箱:zhilihuhit@163.com     Email:zhilihuhit@163.com
作者简介: 张益雷(1989-),武汉理工大学硕士研究生,主要从事板料成形性能及工艺分析研究。
相关功能
PDF(2181KB) Free
打印本文
把本文推荐给朋友
作者相关文章
张益雷  在本刊中的所有文章
胡志力  在本刊中的所有文章
李锦  在本刊中的所有文章
戴明亮  在本刊中的所有文章

参考文献:
[1] Wu H C, Altan T. Process Optimization in Stamping——a Case Study for Flanging a Clutch Hub from Steel Plate[J]. Journal of Materials Processing Technology, 2004, 146(1):8-19
[2] Mori K, Nishijima S, Tan C J. Two-Stage Cold Stamping of Magnesium Alloy Cups Having Small Corner Radius[J]. International Journal of Machine Tools and Manufacture, 2009, 49(10):767-772
[3] Lee J M,Kim B M,Kang C G. A Study on the Cold Ironing Process for the Drum Clutch with Inner Gear Shapes[J]. International Journal of Machine Tools & Manufacture, 2006,46(6):640-650
[4] Sheu J,Yu C. Local Thickening of Stainless Tube Considering Dimension Variation of the Cold Roll Formed Tube Billet[C]//American Institute of Physics Conference Proceedings, 2011:575-580
[5] 王新云,夏巨谌,陈志明,等. 板冲锻成形新工艺及其在轿车飞轮盘加工中的应用[J]. 塑性工程学报, 2008,15(4)180-184 Wang Xinyun, Xia Juchen, Chen Zhiming, et al. Application of a New Sheet Stamping-Forging Hybrid Technology in the Forming of Flying Wheel Panel of Car[J]. Journal of Plasticity Engineering, 2008,15(4)180-184(in Chinese)
[6] 王新云,罗文涛,夏巨谌,等. 汽车飞轮盘温冲锻成形工艺研究[J]. 锻压技术, 2009, 34(5):43-46 Wang Xinyun, Luo Wentao, Xia Juchen, et al. Investigation of Warm Stamping-Forging Process for Car Flywheel Panel[J]. Forging & Stamping Technology, 2009, 34(5):43-46(in Chinese)
[7] 李伟,何鹏举,杨恒,等. 基于粗糙集和改进遗传算法优化BP神经网络的算法研究[J]. 西北工业大学学报, 2012, 30(4):601-606 Li Wei, He Pengju, Yang Heng, et al. An Effective Backpropagation Algorithm for Optimizing BP Neural Network Based on Rough Set and Modified Genetic Algorithm[J]. Journal of Northwestern Polytechnical University, 2012, 30(4):601-606(in Chinese)