静电放电引发嵌入式软件故障的等效实验预测方法 -- 西北工业大学学报,2018,36(1):195-202
论文:2018,Vol:36,Issue(1):195-202
引用本文:
秦海潮. 静电放电引发嵌入式软件故障的等效实验预测方法[J]. 西北工业大学学报
Qin Haichao. Equivalent Experiments Based Prediction Methods for Embedded Software Error due to Electrostatic Discharge[J]. Northwestern polytechnical university

静电放电引发嵌入式软件故障的等效实验预测方法
秦海潮
北京航空航天大学 电子信息工程学院, 北京 100191
摘要:
对于电子设备的正常运行,静电放电有时是一种严重威胁。目前,由静电放电造成的大多数硬件故障问题可以在产品设计阶段进行规避。但静电放电引发的嵌入式软件故障,因其偶发性、突发性、隐蔽性等特点,依然是一项业界难题。将目前发现的嵌入式软件故障进行分类,并提出了一系列软件故障的等效实验监测方法。通过方法探究和大量实验佐证,力图从这些监测方法中寻求静电放电引发嵌入式软件故障的等效实验预测方法。
关键词:    嵌入式软件测试    静电放电    实验设计    WiFi   
Equivalent Experiments Based Prediction Methods for Embedded Software Error due to Electrostatic Discharge
Qin Haichao
School of Electronic and Information Engineering, Beihang University, Beijing 100191, China
Abstract:
Electrostatic discharge (ESD) related embedded software error is a critical issue for electronic products and is hard to discover in the early stage of product development. This paper categorizes different embedded software errors at first, and then presents several detection methods to find precursors of these software errors. By discussing the methodology, the applicability of each method is given, in terms of application scenarios and limitations.
Key words:    embedded software testing    electro-static discharge    design of experiments    WiFi   
收稿日期: 2017-04-12     修回日期:
DOI:
通讯作者:     Email:
作者简介: 秦海潮(1980-),北京航空航天大学博士研究生,主要从事电磁兼容性和电磁环境效应研究。
相关功能
PDF(2929KB) Free
打印本文
把本文推荐给朋友
作者相关文章
秦海潮  在本刊中的所有文章

参考文献:
[1] Mark I Montrose, Edward M Nakauchi. Testing for EMC Compliance:Approaches and Techniques[M]. John Wiley & Sons, 2004:93-94
[2] Iec61000-4-2, Testing and Measurement Techniques-Electrostatic Discharge Immunity Test[S]. Tc 77/Sc 77B-High Frequency Phenomena, 2008-12-09
[3] Charvaka Duvvury, Harald Gossner. Soft Failure Mechanisms and PCB Design Measures[M]. Wiley-IEEE Press, 2015:424
[4] Thomson N A, Xiu Y, Rosenbaum E. Soft-Failures Induced by System-Level ESD[J]. IEEE Trans on Device and Materials Reliability, 2017, 17(1):90-98
[5] Vora S, Jiang R, Vasudevan S, et al. Application Level Investigation of System-Level Esd-Induced Soft Failures[C]//2016 38th IEEE Electrical Overstress/Electrostatic Discharge Symposium, 2016:1-10
[6] Jin J H, Jeon C P, Kim J H, et al. The Reproducibility Improving Method of Systemlevel ESD Test Through Operating Program Workload Analysis[C]//URSI Asia-Pacific Radio Science Conference, 2016:921-924
[7] Schwingshackl T, Orr B, Willemen J, et al. Powered System-Level Conductive TLP Probing Method for ESD/EMI Hard Fail and Soft Fail Threshold Evaluation[C]//2013 35th IEEE Overstress/Electrostatic Discharge Symposium, 2013:1-8
[8] Lim J, Lee J, Seol B, et al. The Evaluation Method for ESD Immunity of Components in Terms of Software Error[C]//EMC Europe, 2011:468-471
[9] Yang S, Orr B, Guo Y, et al. Measurement Techniques to Predict the Soft Failure Susceptibility of an IC without the Aid of a Complete Software Stack[C]//2016 IEEE International Symposium on Electromagnetic Compatibility, 2016:41-45
[10] Antong R, Low D, Pommerenke D, et al. Prediction of Electrostatic Discharge(ESD) Software Error on Two-Way Radio Using ESD Simulation in CST and ESD Immunity Scanning Technique[C]//2014 36th IEEE Electronics Manufacturing Technology Symposium, 2014:1-10
[11] Lee J, Lim J, Jo C, et al. A Study of a Measurement and Simulation Method on ESD Noise Causing Soft-Errors by Disturbing Signals[C]//20113 3rd IEEE Electrical Overstress/Electrostatic Discharge Symposium, 2011:1-5
[12] Lee J, Lim J, Seol B, et al. A Novel Method for ESD Software Error Analysis on Integrated Circuits Using a Tem Cell[C]//2012 34th IEEE Electrical Overstress/Electrostatic Discharge Symposium, 2012:1-6
[13] Lim Jaedeok, Lee Jongsung, Seol B, et al. The Quantitative Approach of EM-Field to Correlate Components and Products in Terms of Esd Software Error[C]//2013 International Symposium on Electromagnetic Compatibility, 2013:916-919