论文:2018,Vol:36,Issue(1):74-82
引用本文:
侯赤, 周银华, 全泓玮, 万小朋. 混合结构中金属疲劳对层合板损伤的影响[J]. 西北工业大学学报
Hou Chi, Zhou Yinhua, Quan Hongwei, Wan Xiaopeng. The Effect of Metal on Composites Fatigue Damage in Mixed Structure[J]. Northwestern polytechnical university

混合结构中金属疲劳对层合板损伤的影响
侯赤1, 周银华2, 全泓玮1, 万小朋1
1. 西北工业大学 航空学院, 陕西 西安 710072;
2. 中航工业第一飞机设计研究院, 陕西 西安 710089
摘要:
针对混合结构中层合板和金属的疲劳损伤耦合问题,构建了复合材料渐进疲劳损伤模型和金属材料Lemaitre疲劳损伤模型,采用唯象的弹塑性本构描述单层复合材料面内剪切非线性,基于球张量和剪切张量的应力分解方法推导了低周疲劳能量释放率计算公式。对单钉与多钉螺栓连接结构进行了疲劳损伤和寿命分析,结论表明:循环加载过程中,多钉连接结构钉载向金属搭接板疲劳硬化区域迁移,加剧了层合板局部挤压损伤,降低了层合板拉断载荷,有利于提高以拉断为破坏模式的层合板疲劳寿命。
关键词:    复合材料连接    损伤分析    本构模型    能量释放率    疲劳损伤   
The Effect of Metal on Composites Fatigue Damage in Mixed Structure
Hou Chi1, Zhou Yinhua2, Quan Hongwei1, Wan Xiaopeng1
1. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. First Aircraft Institute of AVIC, Xi'an 710089, China
Abstract:
This paper investigated the fatigue damage coupling of composite laminate and metallic plate in multi-bolt joint. A progressive fatigue damage model for composite laminates and a modified Lemaitre damage model for metal material were developed. A phenomenological elastoplastic constitutive model was used to describe the in-plane shear nonlinearity of composite lamina. A formula for calculating the energy release rate of the low cycle fatigue was derived based on spherical tensor and shear tensor decomposition of the stress. The developed models were validated by the experimental results of a double-lap single-bolt metal-composite joint and were employed to simulate the fatigue damage of a double-lap, multi-bolt metal-composite joint. The result indicates that fatigue damage will harden the materials nearby the bolt region of the metallic plate for a multi-bolt joint structure when suffering to cyclic loads. This hardening behavior results to a transfer of bolt loads towards the harden region, which intensifies bearing damage and reduces tensile stress in the composite laminate, and improves the fatigue life of composite laminates fail in tensile mode.
Key words:    composite joints    damage analysis    constitutive models    energy release rate    fatigue damage   
收稿日期: 2017-03-12     修回日期:
DOI:
通讯作者:     Email:
作者简介: 侯赤(1981-),西北工业大学讲师,主要从事飞行器复合材料结构分析损伤研究。
相关功能
PDF(2507KB) Free
打印本文
把本文推荐给朋友
作者相关文章
侯赤  在本刊中的所有文章
周银华  在本刊中的所有文章
全泓玮  在本刊中的所有文章
万小朋  在本刊中的所有文章

参考文献:
[1] Chou P C, Croman R. Degradation and Sudden-Death Models of Fatigue of Graphite/Epoxy Composites[C]//Composite Materials:Testing and Design, ASTM STP, Neworleans, 1979:431-454
[2] Halpin J C, Jerina T A, Johnson T A. Characterization of Composites for the Purpose of Reliability Evaluation[C]//Analysis of Test Methods for High Modulus Fibers and Composites, San Antonio, 1973:5-64
[3] Yang J N, Jones D L, Yang S H, et al. A Stiffness Degradation Model for Graphite/Epoxy Laminates[J]. Journal of Composite materials, 1990,24:753-769
[4] 穆鹏刚. 复合材料典型结构疲劳寿命预测方法研究[D]. 西安:西北工业大学, 2012 Mu Penggang. Research on Fatigue Life Prediction of Composite Typical Structures[D]. Xi'an, Northwestern Polytechnical University,2012(in Chinese)
[5] 廉伟, 姚卫星. 复合材料层压板剩余强度-剩余刚度关联模型[J]. 复合材料学报, 2008, 25(5):103-107 Lian Wei, Yao Weixing. Residual Stiffness-Residual Strength Coupled Model of Composite Laminates[J]. Acta Materiae Compositae Sinica, 2008, 25(5):151-156(in Chinese)
[6] Matzenmiller A, Lubliner J, Taylor R L. A Constitutive Model for Anisotropic Damage in Fiber-Composites[J]. Mechanics of Mterial, 1995, 20(2):125-152
[7] Maimi P, Camanho P P, Mayugo J A, et al. A Continuum Damage Model for Composite Laminates:PartⅠ-Constitutive Model[J]. Mechanics of Materials, 2007, 39(10):896-908
[8] Donadon M V, Iannucci L, Falzon B G, et al. A Progressive Failure Model for Composite Laminates Subjected to Low Velocity Impact Damage[J]. Computers & Structures, 2008, 86:1232-1252
[9] Ladeveze P, Ledantec E. Damage Modeling of the Elementary Ply for Laminated Composites[J]. Composites Science and Technology, 1992, 43:257-267
[10] O'Higgins R M. An Experimental and Numerical Study of Damage Initiation and Growth in High Strength Glass and Carbon Fibre-Reinforced Composite Materials[D]. Limerick, University of Limerick, 2007
[11] Payan J, Hochard C. Damage Modelling of Laminated Carbon/Epoxy Composites under Static and Fatigue Loadings[J]. International Journal of Fatigue, 2002, 24:299-306
[12] Lemaitre J, Desmorat R. Engineering Damage Mechanics[M]. Berlin, Springer, 2005
[13] 关迪,孙秦,杨锋平. 一个修正的金属材料低周疲劳损伤模型[J]. 固体力学学报,2013,34(6):571-578 Guan Di, Sun Qin, Yang Fengping. A Modified Low Cycle Fatigue Damage Model for Metals[J]. Chinese Journal of Solid Mechanics,2013,34(6):571-578(in Chinese)
[14] 杨锋平,孙秦,罗金恒,等. 一个高周疲劳损伤演化修正模型[J]. 力学学报,2012,44(1):140-147 Yang Fengping, Sun Qin, Luo Jinheng, et al. A Corrected Damage Law for High Cycle Fatigue[J]. Chinese Journal of Theoretical and Applied Mechanics, 2012,44(1):140-147(in Chinese)
[15] Hahn H T, Tsai S W. Nonlinear Elastic Behavior of Unidirectional Composite Laminae[J]. Journal of Composite Materials, 1973(7):102-118
[16] McCarthy C T, O'Higgins R M, Frizzell R M. A Cubic Spline Implementation of Non-Linear Shear Behaviour in Three-Dimensional Progressive Damage Models for Composite Laminates[J]. Composite Structures, 2010, 92:173-181
[17] Zhou Y H, Yazdani-Nezhada H, McCarthy M A, et al. A Study of Intra-Laminar Damage in Double-Lap, Multi-Bolt, Composite Joints with Variable Clearance Using Continuum Damage Mechanics[J]. Composite Structures, 2014, 116:441-452
[18] Zhou Y H, Hamed Y N, Chi H, et al. A Three Dimensional Implicit Finite Element Damage Model and its Application to Single-Lao Multi-Bolt Composite Joints with Variable Clearance[J]. Composite Structures, 2015, 131:1060-1072
[19] Puck A, Schurmann H. Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models[J]. Composites Science and Technology, 1998, 58:1045-1067
[20] Pinho S T. Modelling Failure of Laminated Composites Using Physically-Based Failure Models[D]. London, Imperial College London, 2005
[21] Egan B, McCarthy M A, Frizzell R M, et al. Modelling Bearing Failure in Countersunk Composite Joints under Quasi-Static Loading Using 3D Explicit Finite Element Analysis[J]. Composite Structures, 2014, 108:963-977
[22] Benjamin Richard, Frederic Ragueneau, Christian Cremona, et al. Isotropic Continuum Damage Mechanics for Concrete under Cyclic Loading:Stiftness Reccveny, Inelastic Strans and Frictional Sliding[J]. Engineering Fracture Mechanics, 2010, 8(77):1203-1223