论文:2015,Vol:33,Issue(4):644-650
引用本文:
邵立, 张树生, 白晓亮, 王荣荣. 基于加工元体的三维工序模型构建方法[J]. 西北工业大学学报
Shao Li, Zhang Shusheng, Bai Xiaoliang, Wang Rongrong. A 3D Process Model Construction Method based on Machining Volume[J]. Northwestern polytechnical university

基于加工元体的三维工序模型构建方法
邵立, 张树生, 白晓亮, 王荣荣
西北工业大学 现代设计与集成制造技术教育部重点实验室, 陕西 西安 710072
摘要:
为了在三维CAPP系统中展现产品零件由毛坯状态向最终成品动态演变的过程,提出了一种以加工元体为基本单元的三维工序模型构建方法。首先,提出了制造特征及加工元体的表达方法,建立了属性邻接图、制造特征体与加工元体的关联关系,对制造特征库进行了构建。接着,对于待加工三维CAD模型,采用凸边分解并经由基面匹配算法从特征库中检索出相应的制造特征,并在此基础上利用CAD模型的几何面信息自动计算出制造特征的定位坐标系和定形参数,同时依据前驱工序模型对定位坐标系和定形参数值进行修正。最后,给定刀具半径和加工余量值,实现加工元体的定位和实例化,并与前驱工序模型做布尔运算,生成三维中间工序模型。在实验部分,以某机加零件为例,对提出方法的有效性进行了实例验证。
关键词:    计算机辅助工艺规划    特征提取    参数化    加工元体    制造特征    工序模型   
A 3D Process Model Construction Method based on Machining Volume
Shao Li, Zhang Shusheng, Bai Xiaoliang, Wang Rongrong
Key Laboratory of Contemporary Design and Integrated Manufacturing Technology under Ministry of Education at Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
The construction method mentioned in the title aims to exhibit in the 3D CAPP system how a product part transforms from its blank to its finished product. First, we propose the manufacturing feature and machining element expression method and establish their relationship and manufacturing feature library. Then, we employ the convex decomposition algorithm and the base-face matching algorithm to extract the manufacturing features of the 3D CAD model. We then use the geometrical information of the CAD model to automatically calculate and calibrate their location coordinate system and size parameters and also use the precursor process model to correct them. In this way, given the cutter radius and the machining allowance value, the machining elements are located and instantiated. Finally, the 3D in-process model is generated by executing the Boolean operation of the machining elements and the precursor process model. The experiments on the complicated product parts verify the effectiveness of the 3D process model construction method.
Key words:    computer aided process planning    feature extraction    parameterization    machining volume    manufacturing feature    process model   
收稿日期: 2015-03-17     修回日期:
DOI:
基金项目: 国家自然科学基金(51175434)资助
通讯作者:     Email:
作者简介: 邵立(1985—),西北工业大学博士研究生,主要从事CAD/CAM、计算机图形学的研究。
相关功能
PDF(3423KB) Free
打印本文
把本文推荐给朋友
作者相关文章
邵立  在本刊中的所有文章
张树生  在本刊中的所有文章
白晓亮  在本刊中的所有文章
王荣荣  在本刊中的所有文章

参考文献:
[1] Virgilio Q, Louis R, Robert P, et al. Will Model-Based Definition Replace Engineering Drawings throughout the Product Lifecycle?A Global Perspective from Aerospace Industry[J]. Computers in Industry, 2010, 61(5): 497-508
[2] 姜北北. 基于全三维模型工艺设计技术[D]. 沈阳:沈阳理工大学, 2013 Jiang Beibei. Based on Full Three Dimensional Model of CAPP System[D]. Shenyang: Shenyang Ligong University, 2013 (in Chinese)
[3] 王恒,宁汝新. 面向制造的特征设计和工序图自动生成[J]. 北京理工大学学报,2004, 24(5):395-398 Wang Heng, Ning Ruxin. Feature Design Based on Design for Manufacturing and Automatic Generation of Process Drawings[J]. Transactions of Beijing Institute of Technology, 2004, 24(5): 395-398 (in Chinese)
[4] 田富君,田锡天,耿俊浩,等. 工序模型驱动的工艺设计方法[J]. 计算机集成制造系统,2011, 17(6): 1128-1134 Tian Fujun, Tian Xitian, Geng Junhao, et al. Process Planning Method Driven by Process Model [J]. Computer Integrated Manufacturing Systems, 2011, 17(6): 1128-1134 (in Chinese)
[5] 赵敏,王细洋. 基于体分解的MBD工序模型快速生成方法[J]. 计算机集成制造系统,2014,20(08):1843-1850 Zhao Min, Wang Xiyang. Rapid Generation Method of MBD Process Model Based on Volume Decomposition[J]. Computer Integrated Manufacturing Systems, 2014, 20(08): 1843-1850 (in Chinese)
[6] 万能, 苟园捷, 莫蓉. 机械加工MBD毛坯模型的特征识别设计方法[J]. 计算机辅助设计与图形学学报, 2012, 24(08): 1099-1107 Wan Neng, Gou Yuanjie, Mo Rong. A New Feature Recongnition Design Method for MBD Rough Model[J]. Journal of Computer Aided Design & Computer Graphics, 2012, 24(08): 1099-1107 (in Chinese)
[7] 刘金峰,倪中华,刘晓军,等. 三维机加工工艺工序间模型快速创建方法[J]. 计算机集成制造系统,2014,20(07):1546-1552 Liu Jinfeng, Ni Zhonghua, Liu Xiaojun, et al. Rapidly Create Method for Inter-Process Model of 3D Machining Process[J]. Computer Integrated Manufacturing Systems, 2014, 20(07): 1546-1552 (in Chinese)
[8] Lockett H L, Guenov M D. Graph-Based Feature Recognition for Injection Moulding Based on a Mid-Surface Approach[J]. Computer-Aiderutud Design, 2005, 37(2): 251-262
[9] Rahmani R, Arezoo B A. Hybrid Hint-Based and Graph-Based Framework for Recognition of Interacting Milling Features[J]. Computers in Industry, 2007, 58(4): 304-312
[10] Sunil V B, Agarwal R, Pande S S. An Approach to Recognize Interacting Features from B-Rep CAD Models of Prismatic Machined parts Using a Hybrid (Graph and Rule Based) Technique[J]. Computers in Industry, 2010, 61(7): 686-701