嵌入式RANS/LES混合方法在槽道流动数值模拟中的应用 -- 西北工业大学学报,2015,33(5):799-803
论文:2015,Vol:33,Issue(5):799-803
引用本文:
李栋, 王翔宇. 嵌入式RANS/LES混合方法在槽道流动数值模拟中的应用[J]. 西北工业大学学报
Li Dong, Wang Xiangyu. Applying Embedded Hybrid RANS/LES Method to Channel Flow[J]. Northwestern polytechnical university

嵌入式RANS/LES混合方法在槽道流动数值模拟中的应用
李栋, 王翔宇
西北工业大学 翼型叶栅空气动力学国防科技重点实验室, 陕西 西安 710072
摘要:
与传统整体式RANS/LES混合方法相比,嵌入式RANS/LES混合方法不再依靠改进后的湍流模型本身或网格疏密自动划分流场中的RANS区域和LES区域,而是通过对流动现象的预估,人为将LES区域嵌入到RANS区域,从而使RANS区过渡到LES区的交界面尽可能与流向垂直,方便合理附加额外的湍流脉动信息。这样做不但确保了LES在某些复杂流动区域彻底支配地位,更重要的是能够避免RANS区对LES区解析湍流发展的污染和抑制。将槽道流场划分为上游RANS区和下游LES区,在经典的SST-DES模型基础上,采用合成涡方法生成交界面的湍流信息,取得了良好的模拟结果。
关键词:    嵌入式RANS/LES混合方法    SST-DES    合成涡方法    槽道流动    数值模拟   
Applying Embedded Hybrid RANS/LES Method to Channel Flow
Li Dong, Wang Xiangyu
National Key Laboratory of Aerodynamic Design and Research, Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
As compared with traditional global hybrid RANS/LES method, embedded hybrid RANS/LES method does not treat the whole field as different RANS or LES regions automatically based on the turbulence model itself or whether the mesh is fine or not. It is aimed to embed any LES part to the background RANS flow artificially so that the interface between RANS and LES is set vertically to the streamwise direction and the extra resolved turbulence information in the interface can be easily and rationally added. That means, it can not only make sure that LES controls the flow principles totally in the regions of complex flow phenomena but also avoid the pollution from RANS and overcome the delay of resolved turbulence in LES regions. In this paper channel flow is divided into upstream RANS and downstream LES regions, and SST-DES is used as the basic hybrid model, together with the additional turbulent fluctuations generated from synthetic eddy method in the interface, which finally lead to a satisfactory simulation.
Key words:    channel flow    computer simulation    drag coefficient    flow fields    friction    large eddy simulation    momentum    Navier Stokes equations    Reynolds number    tensors    turbulence models    velocity distribution    embedded hybrid RANS/LES method    SST-DES    Synthetic Eddy Method(SEM)   
收稿日期: 2015-04-21     修回日期:
DOI:
基金项目: 国家自然科学基金面上项目(11072200)资助
通讯作者:     Email:
作者简介: 李栋(1970—),西北工业大学教授,主要从事空气动力学研究。
相关功能
PDF(1059KB) Free
打印本文
把本文推荐给朋友
作者相关文章
李栋  在本刊中的所有文章
王翔宇  在本刊中的所有文章

参考文献:
[1] Spalart P R. Strategies for Turbulence Modeling and Simulations[J]. Int J Heat Fluid Flow, 2000, 21:252-263
[2] Davidson L, Peng S. Embedded Large-Eddy Simulation Using the Partially Averaged Navier-Stokes Model[J]. AIAA Journal, 2013, 51(5):1066-1079
[3] Shur M L, Spalart P R, Strelets M K, Travin A K. Synthetic Turbulence Generators for RANS-LES Interfaces in Zonal Simulations of Aerodynamic and Aeroacoustic Problems[J]. Flow Turbulence Combust, 2014, 93:63-92
[4] Jarrin N, Benhamdouche S, Laurence D, Prosser R. A Synthetic-Eddy-Method for Generating Inflow Conditions for Large-Eddy Simulations[J]. Int J Heat and Fluid, 2006, 27:585-593
[5] Strelets M. Detached Eddy Simulations of Massively Separated Flows[R]. AIAA-2001-0879
[6] Poletto R, Craft T, Revell A. A New Divergence Free Synthetic Eddy Method for the Reproduction of Inlet Flow Conditions for LES[J]. Flow Turbulence Combust, 2013, 91:519-539
[7] Hoyas S, Jimenez J. Reynolds Number Effects on the Reynolds-Stress Budgets in Turbulence Channels[J]. Physics of Fluids, 2008, 20:10511(1)-101511(8)