|
|
论文:2014,Vol:32,Issue(4):546-549 |
|
|
引用本文： |
|
|
刘睿, 李朋, 周军, 刘莹莹. 基于模型重构的航天器部件级故障建模方法[J]. 西北工业大学 |
|
|
Liu Rui, Li Peng, Zhou Jun, Liu Yingying. Fault Model Construction Method Based on Model Reconfiguration[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 基于模型重构的航天器部件级故障建模方法 |
|
| 刘睿, 李朋, 周军, 刘莹莹 |
|
| 西北工业大学 精确制导与控制研究所, 陕西 西安 710072 |
| 摘要: |
| 提出了基于模型重构的航天器部件级故障建模方法,从对象固有模型出发通过模型重构建立对象故障模型,定义了统一故障模型形式。将功能单元作为研究故障的最小单位,定义了功能单元的划分准则。建模过程包括对象仿真模型建立、对象功能单元划分、功能单元分析、功能单元故障建模、部件级故障建模、正常模型仿真与故障模型仿真结果对比6个步骤完成。最后以电动伺服系统的功率驱动器为例详细说明了功能单元故障模型建立过程。结果表明,所提出的故障建模方法便于操作且具有普遍的适用性。 |
| 关键词:
模型重构
故障建模
功能单元
故障模型
电动伺服系统
|
|
| Fault Model Construction Method Based on Model Reconfiguration |
|
| Liu Rui, Li Peng, Zhou Jun, Liu Yingying |
|
| Institute of Precision Guidance and Control at Northwestern Polytechnic University, Xi'an 710072, China |
| Abstract: |
| A new fault model construction method based on simulator model was presented in this paper. Six steps of this method are as follows:simulator model construction, functional element definition, functional element analy-sis, fault model of functional element construction, fault model of parts construction, simulation. Functional element was considered as the basic unit when constructing fault models. An example about the power supply circuit of the control actuator was illustrated in Fig 5. The fault model construction method presented in this paper, we be-lieve, is easy to operate and is applicable to other cases. |
| Key words:
actuators
computer simulation
control
controllers
deceleration
efficiency
experiments
failure analysis
failure modes
feedback
flowcharting
functional analysis
mathematical models
MATLAB
power supply circuits
sensors
servomotors
spacecraft
control actuator
fault model construction
function element
model reconfiguration
|
|
| 收稿日期: 2013-11-10
修回日期:
|
| DOI: |
| 基金项目: 国家重点基础研究发展计划(1973-6131567);中央高校基本科研业务专项资金(3102014JCQ01003)资助 |
| 通讯作者:
Email： |
| 作者简介: 刘睿(1985-),女,西北工业大学助理研究员、博士研究生,主要从事航天器制导控制研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 刘睿 在本刊中的所有文章 |
| 李朋 在本刊中的所有文章 |
| 周军 在本刊中的所有文章 |
| 刘莹莹 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] Haapanen P, Helminen A. Failure M ode and Effects Analysis of Software-Based Automation Systems Reliability and M aintainability[C] ∥ 2004 Annual Symposium-RAMS, 2004: 201-206
[2] Herbert H, An X G, Myron H. Computer Aided Software FMEA for Unified Modeling Language Based Software[J]. IEEE Trans on Software Engineering, 2004 (3): 243-248
[3] Taylor J R. An Algorithm for Fault Tree Construction[J]. IEEE Trans on Reliability, 1982,(31): 137-146 |
|
|
|
|
|
|
|
