|
|
论文:2012,Vol:30,Issue(4):582-588 |
|
|
引用本文: |
|
|
史静平, 章卫国. 基于AMS结构分析的串接链可达集求解与优化设计[J]. 西北工业大学 |
|
|
Shi Jingping, Zhang Weiguo. An Efficient Optimization Method of Daisy Chain Control Allocation Based on Genetic Algorithm[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
基于AMS结构分析的串接链可达集求解与优化设计 |
|
史静平1,2, 章卫国1 |
|
1. 西北工业大学 自动化学院,陕西 西安 710072; 2. 飞行器一体化技术重点实验室,陕西 西安 710072 |
摘要: |
串接链分配法将包含推力矢量操纵面在内的所有舵面按照优先级分为若干组,对于期望的转矩指令,如果优先级高的一组无法有效分配则启用次级操纵面,如何使基于串接链设计的分配系统根据期望转矩的大小对各组舵面进行自动调用与分配是一个难点。文章对串接链的可达转矩集进行了求解,将各组舵面所能有效分配的最大转矩值作为分配系统实施舵面调用与管理的阈值。串接链的转矩可达集是复杂的非凸几何体,解析方法无法求解,文中通过对分配系统AMS的几何构造分析,提出了一种基于微元的串接链可达集数值求解算法。将串接链的分配效率作为适应度函数,通过遗传算法选择具有最大可达集的广义逆阵,提高了算法的分配效率。 |
关键词:
数值计算
控制面
设计
分配效率
飞行控制系统
适用度函数
遗传算法
逆问题
数值方法
优化
示意图
资源分配
串接链
|
|
An Efficient Optimization Method of Daisy Chain Control Allocation Based on Genetic Algorithm |
|
Shi Jingping1,2, Zhang Weiguo1 |
|
1. College of Automation, Northwestern Polytechnical University, Xi'an 710072, China; 2. Science and Technology on Aircraft Control laboratory, Xi'an 710072, China |
Abstract: |
Daisy chain method divides the effectors of the aircraft into several groups with thrust-vector effector in-cluded. We use daisy chain to switch allocation mode automatically. Sections 1 through 3 explain the optimizationmethod mentioned in the title,which we believe is efficient and whose core consists of: “By calculating the attaina-ble moment subset (AMS) of daisy chain,the maximum moment is obtained and chosen as the switch mark. Dueto non-linear allocation characteristic,AMS of daisy chain is a complex non-convex polyhedron; it is difficult tosolve directly. By analyzing the AMS of flight control allocation system with a‘micro-element'method, we proposea numerical method to calculate the volume of AMS of the daisy chain. With allocation efficiency chosen as fitnessfunction,the genetic algorithm is used to find the best pseudo-inverse matrix and high allocation efficiency is a-chieved. "The simulation results,mostly presented in Table 2 and Fig. 5 but also including the best pseudo-inversematrix P 1 , and their analysis show preliminarily that our proposed optimization method of daisy chain allocation con-trol is indeed efficient. |
Key words:
calculations
control surfaces
design
efficiency
flight control systems
functions
genetic algo-rithms
inverse problems
numerical methods
optimization
resource allocation
schematic dia-grams
three dimensional;daisy chain
|
|
收稿日期: 2011-09-20
修回日期:
|
DOI: |
基金项目: 航空科学基金(20110753006)资助 |
通讯作者:
Email: |
作者简介: 史静平(1980-),西北工业大学讲师、博士,主要从事飞行控制技术的研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 杨恩泉, 高金源. 先进战斗机控制分配方法研究进展. 飞行力学, 2005, 23(3):1-4Yang Enquan,Gao Jinyuan. Research and Development on Advanced Fighter Control Allocation Methods. Flight Dynamics,2005, 23(3):1-4 (in Chinese) [2] 王美仙, 李 明. 先进战斗机控制分配方法研究综述. 飞机设计, 2006, 3:17-19Wang Meixian,Li Ming. Development of Advanced Fighter Control Allocation Methods. Aircraft Design,2006, 3:17-19 (inChinese) [3] 杨恩泉, 高金源, 李卫琪. 多目标非线性控制分配方法研究. 航空学报, 2008, 29(4): 995-1001Yang Enquan,Gao Jinyuan,Li Weiqi. Research on Multi-Object Nonlinear Control Allocation Method. Acta Aeronautica et As-tronautica Sinica, 2008, 29(4):995-1001 (in Chinese) [4] 杨凌宇, 范彦铭, 邵 山等. 基于基排序法的冗余操纵面控制分配与管理. 中国科学:技术科学, 2010, 40: 399-406Yang Linyu,Fan Yanming,Shao Shan,et al. Control Allocation and Management of Redundant Control Effectors Based on Ba-ses Sequenced Method. Science in China: Technological Sciences, 2010, 40(4): 399-406 (in Chinese) [5] 钟友武, 杨凌宇, 申功璋. 多操纵面飞机综合重构飞行控制方法. 北京航空航天大学学报, 2009, 35(11):1320-1324Zhong Youwu,Yang Lingyu,Shen Gongzhang. Integrated Reconfigurable Flight Control Method for Aircraft with Multiple Con-trol Effectors. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(11):1320-1324 (in Chinese) [6] 张曙光,高 浩. 推力矢量飞机操纵指令的协调分配. 西北工业大学学报, 1996, 14(3):361-365Zhang Shuguang,Gao Hao. Coordination of Control Deflector Commands to Thrust Vectored Aircraft. Journal of NorthwesternPolytechnical University, 1996, 14(3):361-365 (in Chinese) [7] Bugajski D J, Enns D F, Hendrick R C. Nonlinear Control Law Design for High Angle-of-Attack. Proc of the High Angle-of-At-tack Projects and Technology Conference,Edwards,CA, 1992, 21-23 [8] Bordignon K,Durham W C. Closed-Form Solutions to Constrained Control Allocation Problem. Journal of Guidance,Control,and Dynamics, 1995, 18(5): 1000-1007 [9] Teel A R,Buffington J M. Anti-Windup for an F-16's Daisy Chain Control Allocator. AIAA-1997-3606 [10]Bordignon K A. Constrained Control Allocation for Systems with Redundant Control Effectors. Ph. D. Thesis, Department of Aer-ospace and Ocean Engineering,Virginia Polytechnic Inst and State Univ,Blacksburg, Va, 1996 [11]李广文, 章卫国, 李 建, 刘小雄. 小生境遗传算法及其在飞行控制系统优化中的应用研究. 飞行力学, 2007, 25(3):79-82Li Guangwen,Zhang Weiguo, Liu Xiaoxiong. The Niche Genetic Algorithm and Its Application in the Optimization of an AircraftFlight Control System. Flight Dynamics, 2007, 25(3):79-82 (in Chinese) [12]史静平, 章卫国, 李广文, 刘小雄. 再分配伪逆法分配效率研究. 中国科学:信息科学, 2010, 53(2):271-277Shi Jingping,Zhang Weiguo,Li Guangwen,Liu Xiaoxiong. Research on Allocation Efficiency of the Redistributed Pseudo In-verse Algorithm. SCIENCE CHINA Informationis Sciences, 2010, 53(2):271-277 (in Chinese) |
|
|
|
相关文献: |
|
|
1.宋受俊, 葛乐飞, 蒋艳玲.基于文化粒子群算法的开关磁阻电机多目标优化设计[J]. 西北工业大学, 2014,32(1): 111-117 |
|
|
2.史静平, 屈晓波, 毕可军.一种基于转矩可达集的操纵面组合分配设计方法[J]. 西北工业大学, 2014,32(1): 123-130 |
|
|
3.王刚, 胡峪, 宋笔锋.利用螺旋桨动力配平的飞翼布局无人机[J]. 西北工业大学, 2014,32(2): 181-187 |
|
|
4.姚从潮, 王新民, 陈晓, 尹海韬.基于改进多目标遗传算法的再入飞行控制分配研究[J]. 西北工业大学, 2014,32(2): 315-322 |
|
|
5.邬晓敬, 肖华, 张伟伟, 宋述芳, 吕震宙.一种基于试验模态参数的结构边界条件优化设计方法[J]. 西北工业大学, 2014,32(5): 707-712 |
|
|
6.黄河, 周军, 刘莹莹.多任务卫星簇适应性轨道设计[J]. 西北工业大学, 2014,32(5): 834-839 |
|
|
7.白俊强, 辛亮, 刘艳, 华俊, 李国俊.复合材料后掠机翼的气动弹性剪裁方法研究[J]. 西北工业大学, 2014,32(6): 843-848 |
|
|
8.刘雄厚, 孙超, 卓颉, 邵炫, 谢磊.基于凸优化方法的MIMO成像声纳的失配滤波处理[J]. 西北工业大学, 2013,31(3): 367-372 |
|
|
9.王星又, 岳晓奎.结合混合法与微分进化法的小推力轨道全局优化设计[J]. 西北工业大学, 2013,31(5): 689-694 |
|
|
10.淡雪, 岳晓奎.基于自适应积分的太阳同步轨道发射优化设计[J]. 西北工业大学, 2013,31(5): 701-705 |
|
|
11.卜月鹏, 宋文萍, 韩忠华, 许建华.基于CST参数化方法的翼型气动优化设计[J]. 西北工业大学, 2013,31(5): 829-836 |
|
|
12.樊艳红, 宋文萍, 韩忠华.提高基于Adjoint方法翼型优化设计鲁棒性的研究[J]. 西北工业大学, 2013,31(4): 547-555 |
|
|
13.耿峰, 祝小平, 周洲, 孟俊生.一种有效的高速攻击型无人机二自由度PID控制[J]. 西北工业大学, 2013,31(1): 1-7 |
|
|
14.史静平, 屈晓波, 李广文.一种基于转矩可达集裁剪设计的广义逆分配方法[J]. 西北工业大学, 2013,31(1): 8-13 |
|
|
15.王龙, 宋文萍, 杨旭东.一种基于伴随方程攻角不变的多目标优化减阻方法[J]. 西北工业大学, 2012,30(1): 68-72 |
|
|
16.郭旺柳, 宋文萍, 许建华, 许瑞飞.旋翼桨尖气动/降噪综合优化设计研究[J]. 西北工业大学, 2012,30(1): 73-79 |
|
|
17.李丁, 夏露.基于膜概念和Kriging模型混合优化算法的翼型设计[J]. 西北工业大学, 2012,30(1): 80-87 |
|
|
18.聂瑞, 章卫国, 李广文, 刘小雄.基于时域Neal-Smith准则的人机控制系统设计多目标优化研究[J]. 西北工业大学, 2012,30(2): 279-285 |
|
|
19.安伟刚, 陈殿宇, 粱生云.复合材料尖削结构同级优化方法研究及ISIGHT实现[J]. 西北工业大学, 2012,30(3): 390-394 |
|
|
20.李沛峰, 张彬乾, 陈迎春.基于响应面和遗传算法的翼型优化设计方法研究[J]. 西北工业大学, 2012,30(3): 395-401 |
|
|
21.张代雨, 宋保维, 王鹏, 董华超.两级系统多学科可靠性设计合成优化方法[J]. 西北工业大学, 2012,30(6): 808-813 |
|
|
22.田薇, 孙秦, 范学领.某型飞机前起舱段结构几何刚度分布优化设计[J]. 西北工业大学, 2012,30(6): 857-861 |
|
|
|
|
|
|