|
|
论文:2013,Vol:31,Issue(5):785-792 |
|
|
引用本文： |
|
|
张岩, 莫蓉, 王延平. 一种面向飞机组件装配过程的全局公差模型[J]. 西北工业大学 |
|
|
Zhang Yan, Mo Rong, Wang Yanping. An Effective Global Tolerance Modelling Method for Aircraft Assembly[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 一种面向飞机组件装配过程的全局公差模型 |
|
| 张岩, 莫蓉, 王延平 |
|
| 西北工业大学 现代设计与集成制造技术教育部重点实验室, 陕西 西安 710072 |
| 摘要: |
| 航空产品外形复杂,制造精度高,其公差信息内容繁多,关联性强,是控制产品最终制造精度的依据,为了实现航空产品装配公差信息的动态完整表达,针对飞机组件装配过程提出了一种构建装配公差全局模型的方法。此方法在装配结构树的基础上,引入弧表示公差元信息,将设计信息及装配工艺过程信息通过标准映射规则融入全局公差模型;在全局公差模型的基础上,借助扩展邻接矩阵给出了装配公差模型的矩阵表示,支撑全局公差模型的应用。在理论研究的基础上以某型飞机的典型组件为实例,验证了方法的有效性。 |
| 关键词:
飞机
装配
映射规则
公差配合
数学模型
|
|
| An Effective Global Tolerance Modelling Method for Aircraft Assembly |
|
| Zhang Yan, Mo Rong, Wang Yanping |
|
| Key Lab of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China |
| Abstract: |
| In order to realize the complete expression of assembly tolerance information for aircraft assembly,a method of constructing global assembly tolerance modeling was proposed in this paper. This method adopted arc to express meta-tolerance information on the basis of the product-structure tree; the design information and assembly process information was fused into global model through standard mapping rules. An expandable adjacency matrix,used to store model data,was defined on the basis of the global model. At last,through taking an aircraft typical component as example,the effectiveness of the method was verified. |
| Key words:
aircraft
assembly
conformal mapping
fits and tolerances
mathematical models
|
|
| 收稿日期: 2012-12-08
修回日期:
|
| DOI: |
| 基金项目: 国家自然科学基金(51375395);国家科技支撑计划(2012BAF10B09)资助 |
| 通讯作者:
Email： |
| 作者简介: 张岩(1983-),西北工业大学博士研究生,主要从事计算机辅助装配公差设计研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 张岩 在本刊中的所有文章 |
| 莫蓉 在本刊中的所有文章 |
| 王延平 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] Lu Cong, Zhao Wanhua, Yu Sijia.Concurrent Tolerance Design for Manufacture and Assembly with a Game Theoretic Approach.International Journal of Advanced Manufacturing Technology, 2012, 62 (1-4): 303-316
[2] Raj M V, Sankar S S, Ponnambalam S G.Optimization of Assembly Tolerance Variation and Manufacturing System Efficiency by Using Genetic Algorithm in Batch Selective Assembly.International Journal of Advanced Manufacturing Technology, 2011,55 (9-12): 1193-1208
[3] Khodaygan S, Movahhedy M R.Tolerance Analysis of Assemblies with Asymmetric Tolerances by Unified Uncertainty-Accumulation Model Based on Fuzzy Logic.International Journal of Advanced Manufacturing Technology, 2011, 53 (7-8): 777-788
[4] A Clément, A Rivière, Serre P.A Declarative Information Model for Functional Requirement.Proceedings of the 4th CIRP Design Seminar.Tokyo Japan April, 1995, 5-6: 1-16
[5] 刘玉生, 高曙明, 吴昭同等.基于特征的层次式公差信息表示模型及其实现.机械工程学报, 2003, 39(3): 1-7 Liu Yusheng, Gao Shuming, Wu Zhaotong, et al.Hierarchical Representation Model and Its Realization of Tolerance Based on Feature.Chinese Journal of Mechanical Engineering, 2003, 39(3): 1-7 (in Chinese)
[6] Guilford J, Turner J.Representational Primitives for Geometric Tolerancing.Computer Aided Design, 1993, 25(9): 577-586
[7] 张开富, 杨海成, 李 原.基于有向图的零件容差建模方法.计算机集成制造系统, 2005, 11 (9): 1234-1238 Zhang Kaifu, Yang Haicheng, Li Yuan.Tolerance Modeling Approach to Part Based on Directed Graph.Computer Integrated Manufacturing Systems, 2005, 11 (9): 1234-1238 (in Chinese)
[8] 胡 洁.基于变动几何约束网络的形位公差设计理论与方法的研究.杭州: 浙江大学, 2001 Hu Jie.Study on Theories and Method of Geometric Tolerance Design Based on Variational Geometric Constraints Network.Hangzhou: Zhejiang University, 2001 (in Chinese) |
|
|
|
相关文献: |
|
|
1．成珂, 王忠伟, 周洲.太阳能飞机工作条件对太阳能电池性能的影响[J]. 西北工业大学, 2012,30(4): 535-540 |
|
|
2．田薇, 孙秦, 范学领.某型飞机前起舱段结构几何刚度分布优化设计[J]. 西北工业大学, 2012,30(6): 857-861 |
|
|
|
|
|
|
