|
|
论文:2013,Vol:31,Issue(3):355-361 |
|
|
引用本文： |
|
|
张永红, 葛文杰, 寇鑫, 刘小勇. 一种载荷路径可控的柔性机翼前缘拓扑优化方法[J]. 西北工业大学 |
|
|
Zhang Yonghong, Ge Wenjie, Kou Xin, Liu Xiaoyong. Topology Optimization for Leading Edge of Adaptive Wing Employing Controllable Load-Path Approach[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 一种载荷路径可控的柔性机翼前缘拓扑优化方法 |
|
| 张永红, 葛文杰, 寇鑫, 刘小勇 |
|
| 西北工业大学 机电学院, 陕西 西安 710072 |
| 摘要: |
| 形变柔性机构拓扑优化设计是解决自适应机翼前后缘连续平滑变形的关键。针对柔性机构传统基结构法拓扑优化结果依赖于其初始结构构型产生方法,存在自由单元和不连续结构的问题,提出了一种载荷路径生成可控并避免路径交叉的方法,运用自适应遗传算法,结合机翼前缘形变柔性机构进行拓扑优化设计,分别用MATLAB编程设计计算和用ANSYS对优化结果进行了有限元形变性能分析,并与传统的载荷路径法的拓扑优化进行了对比分析和实验验证。结果表明:所采用方法有效解决了优化前初始结构构型生成的可行性问题,提高了优化的收敛速度和精度。 |
| 关键词:
柔性机构
机翼前缘
载荷路径可控法
拓扑优化
|
|
| Topology Optimization for Leading Edge of Adaptive Wing Employing Controllable Load-Path Approach |
|
| Zhang Yonghong, Ge Wenjie, Kou Xin, Liu Xiaoyong |
|
| Northwestern Polytechnical University,Xi'an 710072,China |
| Abstract: |
| The topology optimization method of compliant mechanism is the key to the design of continuously smoothly deforming leading edge of adaptive wing.The traditional ground structure method depending on the initial configuration is thought to be the important factor for the cause of free elements and discontinuous structure.So we present a controllable load-path approach, which can avoid self crossing load path.We use adaptive genetic algo-rithm to make topology optimization for a leading edge,simulation was done with ANSYS and MATLAB.Then,under the same conditions,simulation was also done for the traditional ground structure approach.Through the comparison and analysis of deformation results obtained with different methods,it is indicated preliminarily that the controllable load-path method proposed in this paper has advantages in feasibility of the initial configuration, and can improve the convergence speed and precision of the optimization. |
| Key words:
computer simulation
computer software
convergence of numerical methods
MATLAB
mechanisms
optimization
topology
wings
compliant mechanism
controllable load-path approach
leading edge of adaptive wing
topology optimization
|
|
| 收稿日期: 2012-09-11
修回日期:
|
| DOI: |
| 基金项目: 国家自然科学基金(50675175);教育部博士点基金(20096102110017)资助 |
| 通讯作者:
Email： |
| 作者简介: 张永红(1971-),女,西北工业大学副教授,主要从事柔性机构优化设计及传动系统的润滑研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] Stanewsky E.Aerodynamic Benefits of Adaptive Wing Technology.Aerospace Science Technology, 2000, 4: 439-452
[2] Sridhar Kota.Shape Control of Adaptive Structures Using Compliant Mechanisms.Standard Form 298(Rev.2-89), 2000, 1-7
[3] Lu Kerrjia, Kota Sridhar.Design of Compliant Mechanisms for Morphing Structure Shapes.Journal of Intelligent Material Systems and Structures, 2002, 14(6): 379-391
[4] Kota Sridhar, Joel Hetrick, Russell Osborn, Donald Paul, Ed Pendleton, Peter Flick, Carl Ti-lmann.Design and Application of Compliant Mechanisms for Morphing Aircraft Structures.Proceedings of Smart Structures and Materials Industrial and Commercial Applications of Smart Structures Technologies, 2003, 5054
[5] Lu Kerrjia, Kota Sridhar.Design of Compliant Mechanisms for Morphing Structural Shapes.Journal of Intelligent Material Systems and Structure, 2006, 14: 379-391
[6] 黄 杰, 葛文杰, 杨 方.实现机翼前缘形状连续变化柔性机构的拓扑优化.航空学报, 2007, 28(4): 988-992 Huang Jie, Ge Wenjie, Yang Fang.Topology Optimization of the Compliant Mechanism for Shape Change of Airfoil Leading Edge.Chinese Journal of Aeronautics, 2007, 28(4): 988-922 (in Chinese)
[7] Liu Shili, Ge Wenjie, Li Shujun.Optimal Synthesis of Compliant Trailing Edge for Morphing.Chinese Journal of Aeronautics2008.21 (2): 187-192
[8] 陈 秀, 葛文杰, 张永红.基于遗传算法的柔性机构形状变化综合优化研究.航空学报, 2007, 28(5): 1230-1235 Chen Xiu, Ge Wenjie, Zhang Yonghong.Investigation on Synthesis Optimization for Shape Morphing Compliant Mechanisms Using GA.Chinese Journal of Aeronautics, 2007, 28(5): 1230-1235 (in Chinese)
[9] 景 藜.基于载荷路径法的柔性机翼形变综合拓扑优化: [硕士学位论文].西安: 西北工业大学, 2010 Jing Li.Synthesis Topology Optimization for Shape Morphing of Compliant Wing Using Load Path Approach.Master Degree Dissertation.Xi'an: Northwestern Polytechnical University, 2010 (in Chinese)
[10] Lu K J, Kota S.Parameterization Strategy for Optimization of Shape Morphing Compliant Mechanisms Using Load Path Representation.ASME 2003 Design Engineering Technical Conferences and Computer and Information in Engineering Conference, Chicago, Illinois USA, 2003, 2-6 (in Chinese)
[11] 石 山, 励庆孚, 王兴华.基于自适应遗传算法的无刷直流电机的优化设计.西安交通大学学报, 2002, 12: 1215-1218 Shi Shan, Li Qingfu, Wang Xinghua.Design Optimization of Brushless Direct Current Motor Based on Adaptive Genetic Algorithm.Journal of Xi'an Jiao Tong University, 2002, 12: 1215-1218 (in Chinese) |
|
|
|
|
|
|
|
