|
|
Articles:2021,Vol:26,Issue(1):1-15 |
|
|
Citation: |
|
|
HE Jiawei, ZHAO Chendi, GAO Ruiyu, LIU Xuehui, WANG Xue. Life Prediction Model of Machine Tool based on Deep Learning[J]. International Journal of Plant Engineering and Management, 2021, 26(1): 1-15 |
|
|
|
|
|
|
|
| Life Prediction Model of Machine Tool based on Deep Learning |
|
| HE Jiawei, ZHAO Chendi, GAO Ruiyu, LIU Xuehui, WANG Xue |
|
| School of Information Engineering, China University of Geosciences, Beijing 100083, China |
| Abstract: |
| In view of the shortage of traditional life prediction methods for machine tools, such as low accuracy of life prediction and few samples basis attributes, a life prediction model of machine tools combined with machine tool attributes is proposed. The life prediction model of machine tool adopts KL dispersion distribution theory, uses modal superposition method to carry out machine tool life analysis, calculates the theoretical life of machine tool, and then carries on the simulation, obtains the machine tool life prediction value. Compared with the traditional method of machine tool life prediction, the model is based on the application life fatigue damage model, which superimposes the service times and maintenance cycle of the machine tool, derives the influence factor of machine tool life, and obtains the linear relationship between the influence factor of machine tool life and the life of machine tool. The influence factor of machine tool life is introduced as the life prediction parameter of machine tool. The data transformation relationship of HT300 parts is constructed. The original part data is enhanced. The effective training set is obtained. The life prediction model of machine tool based on deep learning is completed. The quantitative analysis of machine tool life is carried out. The experiment of machine tool life prediction using training data set proves the validity of the model. Regression test was carried out on the training data set to reflect the robustness of the model. The prediction accuracy of the model is further verified by Weibull test. |
| Key words:
life prediction model
machine tool
KL divergence
metamorphic relation
data enhancement
|
|
| Received: 2021-01-18
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2021.0101 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] JIN Y, LIU S J. Study on fatigue life of aviation cylindrical roller bearing under thermal mechanical coupling[J]. Lubrication and Seal, 2016,41(12):11-15,25(in Chinese)
[2] ZHENG S L, JIANG Y N, FENG J Z. Fatigue life prediction model under random spectral load based on strength variation characteristics[J]. Automotive Engineering, 2013,35(1):82-87(in Chinese)
[3] MA S C, LUO J, YANG L B. Reliability evaluation of CNC machine tools based on pseudo life data[J]. Science and Technology Wind, 2019(16):98-99(in Chinese)
[4] LU C, PAN S F, ZHANG Y J. Fatigue damage assessment model of heavy machine tool foundation parts[J]. Mechanical Design and Manufacturing, 2018(3):1-3(in Chinese)
[5] Lee B L, Kim K S, Nam K M. fatigue analysis under variable amplitude loading using an energy parameter[J]. International Journal of Fatigue, 2003,25(7)
[6] ZHENG Z G, CAI G W, LI Z J, et al. Interpretation of Manson coffin low cycle fatigue model based on damage mechanics[J]. China Mechanical Engineering, 2011,22(7):812-814(in Chinese)
[7] MINER M A. Cumulative damage in fatigue[J]. ApplMech, 1945,12(3):A159-64
[8] MI Y. Beijing university of posts and telecommunications[D]. The Research of GAN-BASED Scheme for Radar Spectrogram Augmentation, 2019(in Chinese)
[9] FREEDMAN D, SMOLIN Y, KRUPKA E, et al. SRA:Fast removal of general multipath for ToF sensors[J]. Lecture Notes in Computer Science, 2014,8689:234-249
[10] WANG Z, BEN K R. Basic criteria and strategies for constructing transmutation relations[J]. Computer Science, 2012,39(1):115-119(in Chinese)
[11] LIU H Y, YAN P, ZHOU Q, et al. Knowledge extension method of machine tool fault diagnosis based on Semantic Web[J]. Computer Integrated Manufacturing System, 2020,26(3):609-622(in Chinese)
[12] DONG G W, XU B W, CHEN L, et al. Survey of metamorphic testing[J]. Journal of Frontiers of Computer Science and Technology, 2009,3(2):130-143(in Chinese)
[13] WU J B, TANG Q J, YANG M. Research on transformation test method of classification algorithm application program[J]. Computer Application and Software, 2020,37(7):9-13,48(in Chinese)
[14] ZHANG Z Y, CHEN Z Y, XU B W, et al. Research progress of test case evolution[J]. Acta Software, 2013,24(4):663-674(in Chinese) |
|
|
|
|
|
|
|
